Welcome to the ozgolf.net forums.
+ Reply to Thread
Page 214 of 214 FirstFirst ... 114 164 204 209 210 211 212 213 214
Results 5,326 to 5,336 of 5336
  1. #5326
    Junior Member Plays with an ex-hire set
    Join Date
    Feb 05, 2022
    Posts
    42

    Default

    So going by this your initial 56* was a special order from Ping? If so your serial number would give the specs.

    American Golf Supplies are the Australian distributor and have been great to deal with for me every time. I would give them a ring. If your wedges were special order they should be able to give you specs per the serial number and you could also discuss what your chances are of getting a 60* 4.0 made to order. They should be a lot more helpful than the retailers. If you have no chance of getting a 4.0 at least you will know where you stand. The S159's drop in a week or so and omg is that Midnight finish hawt.

    https://americangolf.com.au/
    Thanks for this. They told me they'd sold all their left over wedges to a golf shop in Sydney so I contacted them but they didn't have any of the 60S left. So I will just get the new model. Wedges wear out more quickly anyway right, so I might upgrade my 56S in a years time too.

  2. #5327
    Senior Member Golf Hall of Fame Inductee
    Join Date
    Apr 28, 2004
    Location
    Gold Coast
    Posts
    30,227

    Default

    Good call Gasman. Some of us with requirements far from norm have to suck it up and realise we cant just grab any club out of the barrel and expect it to work or be easily modified. So just buy genuine, fitted to you, and lasts longer.

    Me, i need 4% flat so similar.
    --
    Criticism doesn't bother me, as it means I am doing something and people are watching.
    Handy-Cap

  3. #5328
    Senior Member Multiple Major Winner
    Join Date
    Feb 16, 2008
    Location
    QLD
    Posts
    17,085

    Default

    Quote Originally Posted by TheGasman View Post
    Thanks for this. They told me they'd sold all their left over wedges to a golf shop in Sydney so I contacted them but they didn't have any of the 60S left. So I will just get the new model. Wedges wear out more quickly anyway right, so I might upgrade my 56S in a years time too.
    Good stuff mate. Let us know how the new model goes down the track.
    WITB
    TRS2 9* Velocore Blue 7s
    G430 9* Ventus Velo 7s
    Titleist TSI2 15* DI7s

    Ping G425 19* hybrid Accra TZ6
    Tour Edge XCG 24* hybrid Altus
    Srixon ZX5 MKII 6-pw
    Ping Stealth 2.0 50*SS, 54*SS, 58SS/TS*
    TP Mills Tour Fleetwood

  4. #5329
    Senior Member Touring Pro (European Tour)
    Join Date
    Mar 03, 2007
    Location
    Hobart TAS
    Posts
    4,843
    Blog Entries
    1

    Default

    Quote Originally Posted by TheGasman View Post
    A question for the knowledgeable. I've recently decided I wanted to add a 60 degree wedge to my bag. I have a Ping Glide 4.0 56S. So I wanted to get a Ping Glide 4.0 60S. However Ping have sold out of them and are now selling their new line. I can get a standard 60S from a US retailer. However the shaft in my 56S is 2" longer than standard. And Australian retailers are telling me that it would be hard to know what the correct swing weight would be to match my 56 if I tried to source the matching head and the shaft and have it built. One even suggested that the head would be a different head to match the fact that I have 2' more shaft. So my question is. If I was to order a 'standard' head from the US and have an Australian retailer get the same shaft in for me, will I end up with the same set up as my 56 or do I really need to go through Ping and get them to make the club so it will definitely be the same as my 56 but with the new head?
    Gasman, I have a mint Glide 4 60S I would do at a good price! PM me!
    Gamers
    Ping G430 Max10K 9* Driver with Accra TZ6 stiff flex shaft
    TM Stealth 2+ 3 wood with Crazy Boron 75g Stiff shaft
    Tour Edge C721 19* Hybrid with KBS Tour 80 stiff shaft
    Srixon ZX 5 (mk2) irons with Proj X LZ 5.5 shafts 4 to PW
    Callaway MD5 Raw wedges 50/10 56/14 60/12
    Lajosi Custum Flow Neck putter *Titty Pro V1X ball.

  5. #5330
    Junior Member Plays with an ex-hire set
    Join Date
    Feb 05, 2022
    Posts
    42

    Default

    Gasman, I have a mint Glide 4 60S I would do at a good price! PM me!
    Sorry mate I've already ordered the new model. Besides I need to use Ping so I get the right length matched with swing weight. Thanks.

  6. #5331
    Senior Member Touring Pro (European Tour)
    Join Date
    Apr 26, 2009
    Location
    Adelaide
    Posts
    3,401

    Default

    Anyone in Adelaide available to pull a couple driver heads for me?
    WITB
    Driver: Ping G410 Plus 10.5 w Tensei Orange AV Raw 65g S
    5 Wood: Ping G425 w Tensei Orange AV Raw 75g S
    4 hybrid: Ping G w Alta R
    Irons: 5-PW Ping i210 w PX LZ 5.5
    Wedges: Titleist Vokey SM8 50-10*, SM8 58-10*
    Putter: 2022 Bettinardi BB-8W, 35 inch
    Bag: Jones Original Carry Bag

  7. #5332
    Senior Member Major Winner
    Join Date
    Sep 15, 2012
    Location
    Next Fairway Over, Look Out
    Posts
    10,391

    Default

    Normally I’d be ok to do this but atm all my gear is not at the same location as I am.
    Hit Them Well or Hit Them Often

    W.I.T.B


  8. #5333
    Senior Member Multiple Major Winner
    Join Date
    Feb 16, 2008
    Location
    QLD
    Posts
    17,085

    Default

    Quote Originally Posted by TheGasman View Post
    Sorry mate I've already ordered the new model. Besides I need to use Ping so I get the right length matched with swing weight. Thanks.
    Let me know what you think of the new model mate. They are absolutely in my future at some point.
    WITB
    TRS2 9* Velocore Blue 7s
    G430 9* Ventus Velo 7s
    Titleist TSI2 15* DI7s

    Ping G425 19* hybrid Accra TZ6
    Tour Edge XCG 24* hybrid Altus
    Srixon ZX5 MKII 6-pw
    Ping Stealth 2.0 50*SS, 54*SS, 58SS/TS*
    TP Mills Tour Fleetwood

  9. #5334
    Senior Member Touring Pro (European Tour)
    Join Date
    Apr 26, 2009
    Location
    Adelaide
    Posts
    3,401

    Default

    Quote Originally Posted by Hatchman View Post
    Normally I’d be ok to do this but atm all my gear is not at the same location as I am.
    All good Hatch.
    WITB
    Driver: Ping G410 Plus 10.5 w Tensei Orange AV Raw 65g S
    5 Wood: Ping G425 w Tensei Orange AV Raw 75g S
    4 hybrid: Ping G w Alta R
    Irons: 5-PW Ping i210 w PX LZ 5.5
    Wedges: Titleist Vokey SM8 50-10*, SM8 58-10*
    Putter: 2022 Bettinardi BB-8W, 35 inch
    Bag: Jones Original Carry Bag

  10. #5335
    Senior Member Touring Pro (European Tour)
    Join Date
    Jan 20, 2013
    Posts
    4,398

    Default

    Hey Guys,

    Looking at purchasing a set of Takomo irons heads only. They are the 370 size so will need to use a shim to fit them into my 355 taper shafts.

    Question relates to ferrules:
    I currently have a nice set of Clutch & Co Ferrules and just checking they will look and fit ok with a 355 taper shaft shimmed into a 370 head. OR do I need a different Ferrule size?
    Last edited by thecollective; 12th March 2024 at 11:14 AM.

  11. #5336
    Senior Member Order of Merit winner
    Join Date
    Feb 06, 2006
    Location
    Melbourne
    Posts
    7,604

    Default

    Quote Originally Posted by thecollective View Post
    Hey Guys,

    Looking at purchasing a set of Takomo irons heads only. They are the 370 size so will need to use a shim to fit them into my 355 taper shafts.

    Question relates to ferrules:
    I currently have a nice set of Clutch & Co Ferrules and just checking they will look and fit ok with a 355 taper shaft shimmed into a 370 head. OR do I need a different Ferrule size?
    TC I expect the ferrules on the .355 shafts will be fine. You may just need to check that the external size of the ferrule you have is ok with Takomo hosel diamater
    Srixon 565 - 10.5 deg stiff Miyazaki
    Srixon 565 - 15 deg stiff Miyazaki
    Srixon H45 - 90gr Stiff Whiteboard
    Fourteen DI w/ SPB Stiff
    Bridgestone J15CB 4-PW SPB's Stiff
    Fourteen MT28 TS Spec 53 & 58 DG Spinner
    Piretti Cortino

    GOLF Link

    BENCH

    Drivers/Fairways/Hybrids

    Yamaha v202 9.5* - Tourspec x flex
    Sonartec SS-03
    V Steel 3wd
    V Steel 4wd Attas T3 8x
    Titleist 585h 19*

    Irons
    Mizuno MP33 3-P

    Putters

    Ping Anser, Anser 2, Scottsdale

    Wedges
    Cleveland 54
    Fourteen 48


 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Replies: 19
    Last Post: 9th July 2014, 04:06 PM
  2. The "sledge Adlos swing" thread
    By adlo in forum In the Swing
    Replies: 235
    Last Post: 10th April 2011, 11:51 AM
  3. Replies: 23
    Last Post: 28th November 2009, 05:37 AM
  4. "Golf DVDs For Sale" thread removed
    By OZgolf Mod in forum Pro Shop Archive
    Replies: 0
    Last Post: 10th August 2009, 07:04 PM
  5. Odd thing in the "Now playing on YouTube" Thread
    By Dazza in forum Suggestion Box
    Replies: 8
    Last Post: 21st November 2008, 03:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Back to top