Thanks again mate !
A quick google tells the me i200's are 1.5" ... So one would assume i210's would be the same.
So add 1.5" to the pulls for final build length ... Geez who knew buying a set of pulls would be such mine field.
Might be easier just to buy a set of new shafts for a mathematically challenged soul such as myself.
Thanks again for the info gents, appreciate it.
"If it ain't broke ... Break it"
Is there a way to hard step KBS black taper tip wedge shafts, they are currently new out of the bag regular flex...
Tractor Boys
Yes they can be hard stepped, but each hard step is roughly equivalent to a 1/3 of a flex. So you need 3 hard steps to get to stiff equivalent. To hard step 3 times means putting the 9i shaft in the 6i, 8i into 5i etc. So you will need 3 more 9i/PW shafts (they are usually the same flex) to do the 9/8/7. Not to mention that you will probably need shaft extensions to get the lengths back to what you need.
wow sound like a lot of work, looks as though i will have to buy 3 new wedge shafts in stiff flex..
Thanks for your help Dave..
Tractor Boys
Running out of epoxy.
Where’s everyone getting theirs from and what are you using?
Also who’s still spining/ flo’ing shafts?
Golfworks tour set, black for black ferrules, clear for coloured ferrules.
https://www.golfworks.com/the-golfwo...-epoxy/p/psse/
Never spined or flowed a shaft in my life. Prefer to soothe my OCD instead and install shafts logo down.
Yeh I usually go golfworks but with the shit Aussie dollar, might be quicker/cheaper to buy local?
I need some too Loz.
I still Spine or FLO if I can be arsed having the equipment to do so is probably a factor. Not sure how many golfers can tell the difference though
Srixon 565 - 10.5 deg stiff Miyazaki
Srixon 565 - 15 deg stiff Miyazaki
Srixon H45 - 90gr Stiff Whiteboard
Fourteen DI w/ SPB Stiff
Bridgestone J15CB 4-PW SPB's Stiff
Fourteen MT28 TS Spec 53 & 58 DG Spinner
Piretti Cortino
GOLF Link
BENCH
Drivers/Fairways/Hybrids
Yamaha v202 9.5* - Tourspec x flex
Sonartec SS-03
V Steel 3wd
V Steel 4wd Attas T3 8x
Titleist 585h 19*
Irons
Mizuno MP33 3-P
Putters
Ping Anser, Anser 2, Scottsdale
Wedges
Cleveland 54
Fourteen 48
I need some also, maybe a bulk order coming up?
Taylormade M2 - Tour AD GT6S
Wilson Staff FG Tour F5 3 wood - Matrix HD7
Wilson Staff FG Tour F5 5 wood - Matrix HD7
Wilson Staff V4 Utility 3 iron - Kuro Kage Hybrid shaft
Wilson Staff V6 irons 4 - PW - DG S300 AMT
Wilson Staff PMP Wedges - 52* and 58*
Odyssey Black Tour Series no 9 putter
No one using Araldite?
I'm in Rob
Srixon 565 - 10.5 deg stiff Miyazaki
Srixon 565 - 15 deg stiff Miyazaki
Srixon H45 - 90gr Stiff Whiteboard
Fourteen DI w/ SPB Stiff
Bridgestone J15CB 4-PW SPB's Stiff
Fourteen MT28 TS Spec 53 & 58 DG Spinner
Piretti Cortino
GOLF Link
BENCH
Drivers/Fairways/Hybrids
Yamaha v202 9.5* - Tourspec x flex
Sonartec SS-03
V Steel 3wd
V Steel 4wd Attas T3 8x
Titleist 585h 19*
Irons
Mizuno MP33 3-P
Putters
Ping Anser, Anser 2, Scottsdale
Wedges
Cleveland 54
Fourteen 48
Still trying to get my head around all this ...
BBTG is is pretty self explanatory ... I take it to mean the measurement from the bottom of the bore in the hosel to the ground. I assume the shaft tip butts up against the bottom of the bore ?
My question is ... if the BBTG is 1.5" (like in Ping i200/i210's) does that mean I'd need a 36.5" inch shaft instead of a 37" shaft to get the standard 38" 5 iron length ?
"If it ain't broke ... Break it"
Same here, never had one fail yet.
I only use the slow set variety not the fast set.
I've never had the need to glue something up to use within hours. I've always glued up a day or 2 before I want/need to use. If I was a bigger club Ho the quick turn around time requirement might be different.
Never had a problem with 5 min Araldite.
Always prepare thoroughly, allow to set in a warm environment (ensuite with IXL 3in1 heater is great in winter for this and dryiing Estapol) and never use before max. strength recommendation. Also 5 min has minimal chance of movement in setting period.
I've seen Bramptons-glued clubs give way twice (even with my lack of clubhead speed). At least, one was glued on a winter night.
You don't get me. I'm part of the Union.
So 24 hour Arildite is fine ? It is what I have used because anything else is to expensive . I have used 5minute once on an adapter it lasted 4 swings I think before the whole lot came off
But a set of irons I glued up with 24 hour is still going
I think curing temp definitely has an impact though
Love peoples thoughts on this especially the more experienced club makers
I've used all of the above after my Bramptons and Golfworks stuff either ran out or got old.
Currently using Araldite from some of the suggestions here and it's been perfectly fine for everything for the past year. I have a moderately high swing speed and tend to take deep divots so if it was going to fail, it would have.
I don't use the 5min stuff though, mostly because I don't need to hit something the same day I prep it, and I prefer longer cure times anyway.
There are currently 1 users browsing this thread. (0 members and 1 guests)