That's exactly what originally prompted my post (aside from the red wine): the lack of special prices, and added costs with GST and exchange rates, as well as options on eBay. It seems as though Golfworks is still really only a 'big order' option, rather than bits and bobs.
Thanks again.
Duly noted. I have only ever used the Bramptons stuff since... forever, but never had a club let go in all of my years of Dodgy Brothers Clubmaking.
I'll hit the bay for some ferrules. No immediate urgency , but I am looking to reshaft my other set of irons back from S300 to X100 as soon as I source another set of shafts (after I swapped them when I broke my shoulder) and I won't have enough ferrules to do the job.
Thanks Dave. I'll keep it in mind if I happen to find a set of X100 shafts swiftly.
Don't suppose you have any surplus stiffy-to-extra-stiffy driver shafts you would want to part with? No fancy tip needed as I am still stuck in 2007-2010 era heads. I'd love an update a driver head to something more modern but the bank account says 'no' and the swing says 'why bother'.
Thanks. I saw those, but eBay is awash with cheap .370 ferrules. There are a tonne on aliexpress so I might go there for some shitters.
Grail Golf on eBay US sell excellent quality ferrules and the postage is reasonable.
https://www.ebay.com.au/str/grailgolf/
Welcome back henno!!! I have heaps of 355" ferrules if you want some to get you started. As Canuck mentioned, they can take a while...
Not sure my question fits in here but will ask anyway .
I have a tendency to hit the shorter clubs 6 iron down out near the toe going by the ball mark on the club , mostly it feels ok when I hit the ball ie timing wise , as opposed to hitting a driver off the toe . I try to align the centre of the ball to the centre of the club . My swing is a little inside to out with a strongish right hand thru the ball . I have tried a few things but nothing seems to work . Is this just an angle of attack thing or could it be a fitting issue . Am using mizuno jpx 800’s but haven’t been fitted . I hit a 46 deg Pw 100 mts with a fairly easy swing
If you do it consistently, why not line up the ball towards the heal of the club. Might bring strike back towards the centre of the face. Luke Donald does something similar with irons. Pretty gutsy move though because if strike doesn't change from alignment, el hosel comes into play.
Golflink
WITB
Ping G400 SFT 12* Accra ST55 Tour Z M5
Srixon Z355 17* FW Miyazaki Jinsoku S
RBZ Black 3 HY 19* Rocketfuel 65S
Srixon Zu65 3 20* Nippon NS Pro 980GH
Srixon Z765 S300 4-PW
Tourstage X Wedge 54/10, 58/12
Taylormade Spider Tour Red CS 35"
Hoping someone will be able to steer me in the right direction.
I have recently been given a shaft from a mate to replace the one I have for my Callaway driver, however the tip on the end is the wrong type.
Does anyone know somewhere in the outer east of Melbourne (Chirnside Park) where i can get the tips changed over as i have sourced a replacement tip to fit my driver head
Thanks
I can do the work Steve, but another member, Hardboiled, is a lot closer to you.
If you work anywhere near the CBD I'm happy to meet up and work something out too.
Chappy
Srixon 565 - 10.5 deg stiff Miyazaki
Srixon 565 - 15 deg stiff Miyazaki
Srixon H45 - 90gr Stiff Whiteboard
Fourteen DI w/ SPB Stiff
Bridgestone J15CB 4-PW SPB's Stiff
Fourteen MT28 TS Spec 53 & 58 DG Spinner
Piretti Cortino
GOLF Link
BENCH
Drivers/Fairways/Hybrids
Yamaha v202 9.5* - Tourspec x flex
Sonartec SS-03
V Steel 3wd
V Steel 4wd Attas T3 8x
Titleist 585h 19*
Irons
Mizuno MP33 3-P
Putters
Ping Anser, Anser 2, Scottsdale
Wedges
Cleveland 54
Fourteen 48
There are currently 1 users browsing this thread. (0 members and 1 guests)