3 layers of masking tape only but not double side tape. found below seems WD40 is ok but i'm missing double side tape......
http://golftips.golfsmith.com/common...lubs-1535.html
3 layers of masking tape only but not double side tape. found below seems WD40 is ok but i'm missing double side tape......
http://golftips.golfsmith.com/common...lubs-1535.html
True, the WD40 is used to activate the glue on double sided tape, if you are just using masking tape and don't have an air blower then I would use dish washing liquid, it will make it easier to slide the grip on and then it will dry out.
Or, most of us use hair spray these days.
thanks all, lets make it clear from my understanding and weighing my cost effective options:
masking tape, double sided tape, WD40 -> ok?
masking tape, double sided tape, hairspray -> ok?
masking tape, dish washing liquid -> ok?
masking tape, air -> ok?
And steel -> hairspray ok
WITB
TRS2 9* Velocore Blue 7s
G430 9* Ventus Velo 7s
Titleist TSI2 15* DI7s
Ping G425 19* hybrid Accra TZ6
Tour Edge XCG 24* hybrid Altus
Srixon ZX5 MKII 6-pw
Ping S159 50*SS, 54*SS, 58SS*
TP Mills Tour Fleetwood
I used to use it before i got air. Tee in the grip, pour some in and shake it around as you said, then pour it out of the grip onto the shaft and get cracking. I always made sure i had some freshly on the butt end to get that grip slipping on straight away. Nothing worse than having trouble getting it started then struggling to get it all the way on as the spirits dry.
WITB
TRS2 9* Velocore Blue 7s
G430 9* Ventus Velo 7s
Titleist TSI2 15* DI7s
Ping G425 19* hybrid Accra TZ6
Tour Edge XCG 24* hybrid Altus
Srixon ZX5 MKII 6-pw
Ping S159 50*SS, 54*SS, 58SS*
TP Mills Tour Fleetwood
Masking tape and air, nothing else
in the bag
Cleveland Launcher HB Turbo
RBZ tour spoon BT8M3 stiff
HB 910 19deg Matrix O white x stiff
Wilson staff FGV6 Tour Forged irons
wedges trusty tour 50; 54; 58
SC FB no1 or SC red X
and stuff in the pocketsT7M3 S
Golflink
WITB
Ping G400 SFT 12* Accra ST55 Tour Z M5
Srixon Z355 17* FW Miyazaki Jinsoku S
RBZ Black 3 HY 19* Rocketfuel 65S
Srixon Zu65 3 20* Nippon NS Pro 980GH
Srixon Z765 S300 4-PW
Tourstage X Wedge 54/10, 58/12
Taylormade Spider Tour Red CS 35"
cheers all. can just "masking tape + hairspray" without "double sided tape and a blow" will do?
got the hairspray with Vitnam B5 already so will be good for my hand
never had a problem with WD40... maybe I don't swing hard enough to move it.
WITB
TRS2 9* Velocore Blue 7s
G430 9* Ventus Velo 7s
Titleist TSI2 15* DI7s
Ping G425 19* hybrid Accra TZ6
Tour Edge XCG 24* hybrid Altus
Srixon ZX5 MKII 6-pw
Ping S159 50*SS, 54*SS, 58SS*
TP Mills Tour Fleetwood
Insect spray! Keeps the bugs out ! And saves air.
Is using straight petrol and masking tape old school
when regripping clubs
TaylorMade 2016 M2 driver proforce V2 STaylorMade 2016 M2 3 woodMizuno mp fli-hi 21*Mizuno mp h4 4-pw KBS c-taper lite 105 rTitleist sm4 50, 54* & 58* Taylormade Itsy Bitsy Spider cs
No, just to expensive to use petrol lol
in the bag
Cleveland Launcher HB Turbo
RBZ tour spoon BT8M3 stiff
HB 910 19deg Matrix O white x stiff
Wilson staff FGV6 Tour Forged irons
wedges trusty tour 50; 54; 58
SC FB no1 or SC red X
and stuff in the pocketsT7M3 S
Hi all,
Couple question on fw and shaft.
> I brought a AXIVcore Red tour 89 S with .335 uncut at 46inch.
Question: can this be used as a fairway wood shaft? I assume it's the same shaft for driver and fw?
> I want to put it into a 2013 Adams Tightlie 3 wood, it currently has a Mitsubishi Bassara shaft 55g regular, and I hit a very hit draw (too high IMO)
Question: What kind of result should I expect? lower flight? maybe a bit more consistency?
Trying to decide if I should re-shaft or just keep hitting ballooning draws..
Thanks in advance
There are currently 8 users browsing this thread. (1 members and 7 guests)