Looking for a 3i shaft ... And found a gripped shaft pull that is 38.5 in length. In general, what iron would a 38.5 shaft pull go into ?
Thanks in advance.
Looking for a 3i shaft ... And found a gripped shaft pull that is 38.5 in length. In general, what iron would a 38.5 shaft pull go into ?
Thanks in advance.
"If it ain't broke ... Break it"
Ping G430 MAX 9° - Tour Alta CB Stiff
Ping G430 MAX 15° - Tour Alta CB Stiff
Ping G430 Hybrid 20.5° - Tour Alta CB Stiff
Srixon ZX7 4-PW - Dynamic Gold Tour Issue 120 S300
Cleveland RTX Zipcore 50°, 54°, 58°
Having SOME success with a Ping Tomcat, pray for me.
GolfMap
I'd rather be putting on a little too much than not enough risking detachment. Ferrules used on some makes that more difficult to wipe clean.
Last edited by Hatchman; 9th December 2020 at 10:07 AM.
Ping G430 MAX 9° - Tour Alta CB Stiff
Ping G430 MAX 15° - Tour Alta CB Stiff
Ping G430 Hybrid 20.5° - Tour Alta CB Stiff
Srixon ZX7 4-PW - Dynamic Gold Tour Issue 120 S300
Cleveland RTX Zipcore 50°, 54°, 58°
Having SOME success with a Ping Tomcat, pray for me.
GolfMap
Any tips for removing the adapter screw from a driver head. It is threaded, I have a spare screw but cant get it out. Tried long nose pliers won't budge
Drill the head off, like you would to remove a rivet
in the bag
Cleveland Launcher HB Turbo
RBZ tour spoon BT8M3 stiff
HB 910 19deg Matrix O white x stiff
Wilson staff FGV6 Tour Forged irons
wedges trusty tour 50; 54; 58
SC FB no1 or SC red X
and stuff in the pocketsT7M3 S
Pin punch wouldn't budge, had to drill it out..
All good now.. cheers
Long time, no see.
I bought a few new clubs off PING recently, and, having settled on the sleeve setting, I then removed the grips to realign them. I used my own double-sided tape and now the grips feel a bit too thick.
I noticed PING had used this super, super thin grip tape... so thin it was transparent.
Just wondering if this is double-sided tissue tape, and if anyone has used this type of tape with success?
Srixon 565 - 10.5 deg stiff Miyazaki
Srixon 565 - 15 deg stiff Miyazaki
Srixon H45 - 90gr Stiff Whiteboard
Fourteen DI w/ SPB Stiff
Bridgestone J15CB 4-PW SPB's Stiff
Fourteen MT28 TS Spec 53 & 58 DG Spinner
Piretti Cortino
GOLF Link
BENCH
Drivers/Fairways/Hybrids
Yamaha v202 9.5* - Tourspec x flex
Sonartec SS-03
V Steel 3wd
V Steel 4wd Attas T3 8x
Titleist 585h 19*
Irons
Mizuno MP33 3-P
Putters
Ping Anser, Anser 2, Scottsdale
Wedges
Cleveland 54
Fourteen 48
Golflink
WITB
Ping G400 SFT 12* Accra ST55 Tour Z M5
Srixon Z355 17* FW Miyazaki Jinsoku S
RBZ Black 3 HY 19* Rocketfuel 65S
Srixon Zu65 3 20* Nippon NS Pro 980GH
Srixon Z765 S300 4-PW
Tourstage X Wedge 54/10, 58/12
Taylormade Spider Tour Red CS 35"
I am going to have to go against the tide here, and I'll disagree with cloth tape. As someone who changes grips for a living, there is nothing worse than trying to clean up the residue that it leaves behind.
I have also gone off hairspray - if you don't seat the grip right first time and have to move it, it will always move after. I have gone back to rubber cement as my preferred method. Plenty of time to get it right, and no movement after.
+4 just for the masking tape....
I don't always use rubber cement, but when I do I make sure it bounces at least once in the rough
Last edited by chappy1970; 2nd February 2021 at 07:35 AM.
Srixon 565 - 10.5 deg stiff Miyazaki
Srixon 565 - 15 deg stiff Miyazaki
Srixon H45 - 90gr Stiff Whiteboard
Fourteen DI w/ SPB Stiff
Bridgestone J15CB 4-PW SPB's Stiff
Fourteen MT28 TS Spec 53 & 58 DG Spinner
Piretti Cortino
GOLF Link
BENCH
Drivers/Fairways/Hybrids
Yamaha v202 9.5* - Tourspec x flex
Sonartec SS-03
V Steel 3wd
V Steel 4wd Attas T3 8x
Titleist 585h 19*
Irons
Mizuno MP33 3-P
Putters
Ping Anser, Anser 2, Scottsdale
Wedges
Cleveland 54
Fourteen 48
Why not use masking tape and no glue? Just blow on using any of the usual lubricants
There are currently 2 users browsing this thread. (0 members and 2 guests)