PDA

View Full Version : Wanted: G30 shaft adapter



Matt
4th December 2017, 09:47 PM
Trying here first, Does anybody have a adapter to suit a Ping G30? Needs to be .350 tip size.

Foburger
5th December 2017, 11:35 AM
I've got plenty of 0.335's and shims if that helps. Not sure I've ever seen a 0.350".

grandmasterb
5th December 2017, 12:18 PM
I've got plenty of 0.335's and shims if that helps. Not sure I've ever seen a 0.350".

Every Ping adapter I've done of late (G15,25,30,G,400) have all been .335 tips. I don't think they've ever done a 0.350 tip!

Matt
5th December 2017, 12:22 PM
I’m certainly no expert, I know ping don’t do one in .350, there are aftermarket ones in that size I think.

Captain Nemo
5th December 2017, 01:33 PM
Just get an aftermarket or shave the tip down?

Horse
5th December 2017, 04:56 PM
All PING shafts since the introduction of the G25 drivers are .335
G20 and prior models used .350 in the stock PING shafts, some OEM were .335

Captain Nemo
5th December 2017, 05:48 PM
Plenty of cheap knockoff 0.350 sleeves on eBay...

perci
5th December 2017, 05:55 PM
They are only Aluminium so can be drilled out easy enough!

Captain Nemo
5th December 2017, 06:01 PM
They are only Aluminium so can be drilled out easy enough!
Or that!

Matt
5th December 2017, 06:04 PM
Thanks for the help lads. Might give the drilling out a miss haha. I’ve sourced one from elsewhere.