Various shafts

[Pingsta]

Got the following shafts for sale:

Driver shafts

Crazy Boron shaft - Stiff flex plays 45" in my XR16 Pro. $OLD posted East Coast

Speeder 565 shaft- Stiff flex Play 45" in my XR16 Pro. $OLD posted East Coast

FW Shafts

Project X LZ 6.0 3 wood length pulled from my XR Pro FW. $70 posted East Coast

Crazy S-531 B Prototype shaft X Flex (Was originally driver length with a butt extension installed when I received it but removed with a thought to use this as a 4/5 wood shaft but never got around to it). $100ono posted East Coast

4 iron or Hybrid shaft
Attas Elements prototype 85g stiff flex Hybrid shaft ( Would be a good shaft to experiment with) - $60 posted East Coast

[Jazz18]

What's the tip size and raw length of the hybrid shaft mate?

[Pingsta]

What's the tip size and raw length of the hybrid shaft mate?

Rich,

text sent

[benno_r]

What's the tip size and raw length of the hybrid shaft mate?

I have that same shaft in my ZU45 18deg. Cracker setup.

[Pingsta]

I have that same shaft in my ZU45 18deg. Cracker setup.

Hey Benno,

Would you happen to know what the tip size is for this shaft?

[benno_r]

Hey Benno,

Would you happen to know what the tip size is for this shaft?

Stock, they are 0.370. If your shaft is the one I sold Nudgee, then it has been shaved to 0.355 taper.

[Pingsta]

Stock, they are 0.370. If your shaft is the one I sold Nudgee, then it has been shaved to 0.355 taper.

Thanks, it will be stock 0.370. I bought this off one of the pro's at Kingston Heath years ago was in a Ping Rapture hybrid thing - lol should never have pulled that club apart.

Cheers

[backintheswing]

Dom, a lot of ping hybrids are .355 taper. I had to shave down a matrix Ozik Altus to fit an i20 hybrid.