PDA

View Full Version : Shaft Recommendation



Pinglauncher
1st July 2016, 01:39 PM
Looking for a low to mid 60 gram shaft in "A" flex or something that plays a little softer than reg. Playing a G30 at 44.5" and want a backup shaft for days when my back feels worse than normal :( Something high launch is good.

Any recommendations welcome or maybe there is a suitable shaft out there looking for a new home.

BayBum
1st July 2016, 03:50 PM
The 'made for titlest' shafts always play like noodles and get the ball up quick. Also the Orochi, stock mizuno shaft is another.

A shaft that soft isn't usually talked about much here, not that i have read, so I'm just talking from personal experience:)

jocker
1st July 2016, 04:20 PM
I have an Oban which may suit:

Oban Isawa 55 (04) with a G30 tip plays at 44.5

It says 59grams and mid-high launch on the box http://www.obanshafts.com/woods/isawa-red/

TheNuclearOne
1st July 2016, 06:54 PM
04 is stiff. He's after something softer than reg.

Icestorm959
1st July 2016, 07:24 PM
G30 stock regular is pretty soft for a regular, could work. I've got one surplus if you're interested.

JADO75
2nd July 2016, 05:47 AM
http://www.ebay.com.au/ulk/itm/172138031466

This is your huckleberry

JADO75
2nd July 2016, 05:56 AM
If that isn't your cup of tea try chasing a Cleveland driver with Miyazaki C. Kua shaft in it. You should be able to find something sub $100 & pull the shaft.

Pinglauncher
2nd July 2016, 11:50 AM
http://www.ebay.com.au/ulk/itm/172138031466

This is your huckleberry

These are all 50 gram shafts and too light to play at the shorter length. I need something low 60 gram range.

JADO75
2nd July 2016, 11:59 AM
Yep I didn't read the too good.
You can get Bassarra's in the 60's

Haystacks
2nd July 2016, 11:33 PM
I have a made for titleist kai'li in reg. It's 65 gram

Sent from my SM-G900I using Tapatalk

Dotty
3rd July 2016, 07:11 AM
These are all 50 gram shafts and too light to play at the shorter length. I need something low 60 gram range.
I'm half-looking for something around 50g to go into a Bio Cell driver.

Currently has a stock 60g Project X PXv regular, which would become surplus.

benno_r
3rd July 2016, 07:38 AM
If anyone is interested, I have a 55g A flex Harrison Eclipse. This shaft is the update to the legendary Harrison Saga. I had one in stiff 65g and it is a cracker. Currently has a Nike tip, but would let it go pretty cheap if buyer could wait for me to remove the tip.