PDA

View Full Version : For Sale: Make an Offer - Cleanout (right handed clubs)



Stuart
4th October 2015, 11:33 AM
I am cleaning out the cupboard and putting back up a multitude of stuff that I have mostly gathered from here over the years - I would prefer to give OZgolfers first right of rejection.

I can't remember who I got all individual items from (having deleted my inbox messages a while back), while some came from the local pro-shop.

Rather than offending anyone, I won't set prices and just ask for a reasonable offer. Photos showing actual condition in following posts.

Putters:

- Ping Ketsch - sold to Hunter
- Ping Pickemup B

Iron Sets

- Cobra S3 (4-P)
- Tour Edge Exotics XCG-3 (4-P)
- Macgregor M685 Forged (4-P)
- Wilson Staff DI7 (4-S) - Sold to Ferrins

Drivers

- Ping i20 (8.5*)
- Nickent 4DX Revolver (9*)

Fairway Woods

- Tour Edge Exotics XCG (15*)
- Adams Speedline XTD Super Fairway (14.5*)

Training Club

- Tour Striker 8 iron - Sold to Ferrins

Stuart
4th October 2015, 11:36 AM
Putters

376223762337624376253762637627

Stuart
4th October 2015, 11:40 AM
Iron Sets (TEE - DI7 - M685)

376283762937630376313763237633

Stuart
4th October 2015, 11:42 AM
Irons Sets (Cobras)

3764837649376503765137652

Stuart
4th October 2015, 11:48 AM
Drivers

376373763837639

Stuart
4th October 2015, 11:49 AM
376403764137642

Stuart
4th October 2015, 11:52 AM
Fairway Woods (TEE - Adams)

37644376453764637643

Stuart
4th October 2015, 11:54 AM
Tour Striker

37647

Ferrins
4th October 2015, 11:56 AM
Interested in the S3's what are the shafts and flex please?

Stuart
4th October 2015, 12:01 PM
S3s are interesting in terms of shafts - I had never noticed until a week or two ago, but they all have Aldila 65 regular flex graphite shafts (mid kick point) EXCEPT for the six iron. This has a stiff shaft for some unknown reason. I played with them for a while and genuinely never noticed, but I included a photo of the shafts for this very reason.

The person who sold them to me (can't remember who it was) didn't mention it at the time, but they may be able to chime in if they see this?

Ferrins
4th October 2015, 12:04 PM
Ok. The pics won't work for the S3

Stuart
4th October 2015, 12:15 PM
OK - will try them again.

3764837649376503765137652

Stuart
4th October 2015, 12:16 PM
Hmmmm - just noticed that some of the photos are appearing in the post, but others are coming up as 'attachments' (same issue for the Ping i20 driver). Any suggestions why this is happening?

Ferrins
4th October 2015, 12:17 PM
Pass on the s3's but would like to get the tour striker.

Ferrins
4th October 2015, 12:24 PM
The only thing is I can get a brand new one with instructional cd delivered for $68.

Stuart
4th October 2015, 12:38 PM
Can't help with the instruction cd unfortunately.

I was quite serious in the opening post about make an offer - in terms of the tour striker I am actually happy to pass it on for postage costs. How does $15 posted sound?

Ferrins
4th October 2015, 12:57 PM
Awesome, big thanks.

Hatchman
4th October 2015, 01:13 PM
Any pics of the backs on the Coba's

sheezymaneezy
4th October 2015, 01:29 PM
What shafts are in the Ping driver and the fairways Stuart?

Captain Nemo
4th October 2015, 01:31 PM
What length Is the Ketsch?
What shaft is in the i20
Load pics on tapatalk, piece of piss.

nadg63
4th October 2015, 01:34 PM
Any pics of the backs on the Coba's

What do you want GI's for!? Things gotten that bad?

Stuart
4th October 2015, 01:35 PM
Awesome, big thanks.

Easy done - shoot me through a pm with your address and I'll throw it into the mail on Tuesday.

Ferrins
4th October 2015, 01:38 PM
I would be keen on those Di7 irons for my son.

Stuart
4th October 2015, 01:40 PM
Any pics of the backs on the Coba's

See below photo of back of 5-iron (representative of condition) - trying to take photos of them all just made it difficult to see. More than happy to provide more photos if you want.

37653

Stuart
4th October 2015, 01:45 PM
What shafts are in the Ping driver and the fairways Stuart?

Ping i20 has the default TFC 707D (stiff)

TEE has a Aldila DVS 65 (regular)

Adams has a Aldila TrinityF-75 (stiff) - think it came out of a Callaway perhaps?

Stuart
4th October 2015, 01:48 PM
What length Is the Ketsch?
What shaft is in the i20
Load pics on tapatalk, piece of piss.

Ketsch plays 35 inches from top of grip to ground (measuring straight down the shaft).

Stuart
4th October 2015, 01:58 PM
I would be keen on those Di7 irons for my son.

How does $80 posted (including the Striker) sound?

Ferrins
4th October 2015, 01:59 PM
Great I'll grab the TEE as well please.

Stuart
4th October 2015, 02:06 PM
Great I'll grab the TEE as well please.

No dramas - let me know if there is anything else to throw in and what it all works out to be :)

Postage will go up a bit as the TEE is too long to send via Aus Post unfortunately and I'll have to use E-go.

Stuart
4th October 2015, 02:07 PM
Ketsch plays 35 inches from top of grip to ground (measuring straight down the shaft).

I should have mentioned that the Ketsch is a fitted as a 'straight stroke'.

Ferrins
4th October 2015, 02:13 PM
No dramas - let me know if there is anything else to throw in and what it all works out to be :)

Postage will go up a bit as the TEE is too long to send via Aus Post unfortunately and I'll have to use E-go.

Spending all my money on the bloody boat trailer atm😉

Ferrins
4th October 2015, 02:26 PM
No dramas - let me know if there is anything else to throw in and what it all works out to be :)

Postage will go up a bit as the TEE is too long to send via Aus Post unfortunately and I'll have to use E-go.

Don't worry about the TEE as I have never been able to hit any of their clubs.

Stuart
4th October 2015, 02:36 PM
This is one of their easier ones to hit - although in my case, I hit it with a big hook.

I still use the original TEE CB1. I haven't found anything yet that performs better.

Captain Nemo
4th October 2015, 02:40 PM
Spending all my money on the bloody boat trailer atm😉

Why are you dressed as a farmer?

Johnny Canuck
4th October 2015, 03:03 PM
I should have mentioned that the Ketsch is a fitted as a 'straight stroke'.

How much are you looking for?

Hatchman
4th October 2015, 03:18 PM
What do you want GI's for!? Things gotten that bad?

All my irons are GI :mrgreen:
If I swing it better my game will improve :smt102


See below photo of back of 5-iron (representative of condition) - trying to take photos of them all just made it difficult to see. More than happy to provide more photos if you want.

37653

Thanks Stuart.
Not the ones I thought they might be, I'm out.

Ferrins
4th October 2015, 04:09 PM
Payment sent, thanks.

Stuart
5th October 2015, 07:54 AM
Original post updated with sold items noted.

Feel free to take a further 20% off any remaining offers.

Golfwhang
5th October 2015, 01:58 PM
Sry what shaft is in Adams 3 wood and how much you looking for it?

Stuart
5th October 2015, 03:13 PM
Sry what shaft is in Adams 3 wood and how much you looking for it?

Will update all items in next post

Stuart
5th October 2015, 03:17 PM
The whole "make an offer" thing has been a bit of a fizzer. Lets try setting some arbitary prices, everyone can then low-ball me, and we can end up in the same spot :)

Updated list (prices subject to offer, but not inclusive of postage until so negotiated):

Putters:

- Ping Pickemup B ($50)

Iron Sets

- Cobra S3 (4-P) - $150 (Aldila 65 regular flex graphite shafts (mid kick point) EXCEPT for the six iron. This has a stiff shaft. Buggered if I know why)
- Tour Edge Exotics XCG-3 (4-P) - $75 (True Temper Dynalite Gold R300 shafts)
- Macgregor M685 Forged (4-P) - $75 (Rifle 5.5 shafts)


Drivers

- Ping i20 (8.5*) - $75 (TFC 707D (stiff)
- Nickent 4DX Revolver (9*) - $25

Fairway Woods

- Tour Edge Exotics XCG (15*) - $50 (Aldila DVS 65 regular)
- Adams Speedline XTD Super Fairway (14.5*) - $50 (Aldila TrinityF-75 stiff)

Captain Nemo
5th October 2015, 03:58 PM
Pm sent.

solarbear
5th October 2015, 07:23 PM
Any idea the flex of the MacGregors?

edit: nm didn't see the above post

Captain Nemo
5th October 2015, 07:27 PM
I'm keen on the ping, no response though?

Stuart
5th October 2015, 07:52 PM
I'm keen on the ping, no response though?

Didn't receive first pm - have just shot you through one.

stopper
5th October 2015, 07:56 PM
What shaft is in the nickent? How much is post to 2148?

Stuart
5th October 2015, 08:22 PM
What shaft is in the nickent? How much is post to 2148?

It has a UST SR3 65gram stiff shaft. I would have to send it via courier (as it is too long for Aus Post), so it would be about $27.50. Happy to do it for $50 in total.

Stuart
6th October 2015, 03:43 PM
Updated:

Putters:

- Ping Pickemup B ($50)

Iron Sets

- Tour Edge Exotics XCG-3 (4-P) - $75 (True Temper Dynalite Gold R300 shafts)
- Macgregor M685 Forged (4-P) - $75 (Rifle 5.5 shafts)


Drivers

- Ping i20 (8.5*) - $75 (TFC 707D stiff)
- Nickent 4DX Revolver (9*) - $25 (UST SR3 stiff)

Fairway Woods

- Tour Edge Exotics XCG (15*) - $50 (Aldila DVS 65 regular)
- Adams Speedline XTD Super Fairway (14.5*) - $50 (Aldila TrinityF-75 stiff)

Ferrins
8th October 2015, 10:02 AM
Didn't know you were in Armidale, my wife is there atm.

Stuart
8th October 2015, 11:54 AM
Bugger - could have saved you some postage costs!

Lagerlover
9th October 2015, 01:46 PM
Didn't know you were in Armidale, my wife is there atm. *their

mrbluu
9th October 2015, 02:03 PM
*their They're*

kiwitown
9th October 2015, 02:37 PM
where?

AusOdy
9th October 2015, 02:49 PM
thanks Stuart, club arrived and thanks heaps!!

Stuart
9th October 2015, 05:21 PM
thanks Stuart, club arrived and thanks heaps!!

Good - I always get slightly nervous when sending stuff!