Rogue MSI 110

[mrbluu]

Anyone try tipping these??

I used one today in my Jetspeed and it was a touch on the soft side, quite high launching with a fair bit of spin. Think of tipping by 0.5 or 1", has anyone given this a go??

[Captain Nemo]

No but I may now....

[TheNuclearOne]

You wouldn't go an inch straight up, try 1/2". Personally i'd even go 1/4" to start since you build your own stuff and it's about 10 mins work. You've got to keep overall length in mind too.

[mrbluu]

You wouldn't go an inch straight up, try 1/2". Personally i'd even go 1/4" to start since you build your own stuff and it's about 10 mins work. You've got to keep overall length in mind too.
Thanks TNHO I was thinking going 1/2" first up as it feels pretty loose. I dont mind playing the driver closer to 44"

[TheNuclearOne]

You could go 1/2" for sure, it's the common jump, i'm just a bit pedantic. So the driver is 44.5" now?

[oldracer]

any update on this Bluuey??? want to find out some recommendations on Rogue shafts, particularly with similar specs to a AD BB6, cheers Al

[mrbluu]

No I didn't try to tip it mate. The are good shafts but not quite right for me. If u are a low ball hitting then they are perfect.

[oldracer]

No I didn't try to tip it mate. The are good shafts but not quite right for me. If u are a low ball hitting then they are perfect.thanks B, another BB6 it is then

[mrbluu]

thanks B, another BB6 it is then
I've never hit a BB6 mate so I don't know, but dibs ;)

[JADO75]

I wouldn't say the rogue's are a higher launching shaft

[mrbluu]

I wouldn't say the rogue's are a higher launching shaft
All I was saying it was higher launching than what I expected and the redtie.

[oldracer]

I've never hit a BB6 mate so I don't know, but dibs ;)no probs, all yours

[benno_r]

Bit of a tangent here, but OR, if you want low and smooth, keep an eye out for one of these:

http://www.ebay.com/itm/NEW-UST-Mamiya-Attas-Elements-MK-6-Driver-Fairway-Wood-Shaft-Stiff-Flex-/191433064795?pt=LH_DefaultDomain_0&hash=item2c924cc15b

[oldracer]

Bit of a tangent here, but OR, if you want low and smooth, keep an eye out for one of these:

http://www.ebay.com/itm/NEW-UST-Mamiya-Attas-Elements-MK-6-Driver-Fairway-Wood-Shaft-Stiff-Flex-/191433064795?pt=LH_DefaultDomain_0&hash=item2c924cc15bthey good Benno??? you using one? was also looking at aldila Blue ATX 65 S, seems to have good specs, any idea on these? cheers Al

[benno_r]

they good Benno??? you using one? was also looking at aldila Blue ATX 65 S, seems to have good specs, any idea on these? cheers Al

I have the Elements RK which is the mid launch version. I also have a tour blue ATX 65S. Tour Blue is nice, but not a patch on the elements. The rogue is also a much better shaft than the blue.

In my opinion, the Attas series is up there with the AD series, but are able to be found a lot cheaper.

Also look for the Elements Earth - this is the US version of the Elements MK.

[3oneday]

No I didn't try to tip it mate. The are good shafts but not quite right for me. If u are a low ball hitting then they are perfect.what tip size, weight and length please?

[mrbluu]

what tip size, weight and length please?
Did u buy a toppy driver???

[Shane788]

I've never hit a BB6 mate so I don't know, but dibs ;)

I've got a bb6s for sale Binh, top shaft.

[JADO75]

I've got a bb6s for sale Binh, top shaft.

Length, untipped, price etc please

[TheNuclearOne]

No I didn't try to tip it mate. The are good shafts but not quite right for me. If u are a low ball hitting then they are perfect.

These would be one of the last shafts i'd recommend for a low ball hitter. The Red Tie if anything plays a little stout to flex, if you'd have tipped your 110msi 1/2" it would have tightened up appreciably. The 110msi is built to the old NV profile with updated materials. I'm not sure i'd even overly recommend the 95msi Black to a low ball hitter just yet. The 95msi 70 was quite penetrating in my JS and the Black 80 hits penetrating bullets in a 3Deep.

Can't wait to take the hybrid version for a burl :D

[TheNuclearOne]

Just had a very satisfying driving day with the 110msi 70 Silver in my G30LS. Hit some real penetrating drives in blowy conditions with winds gusting to 48k. Very nice for the 1 or 2 we had downwind :D

[mrbluu]

These would be one of the last shafts i'd recommend for a low ball hitter. The Red Tie if anything plays a little stout to flex, if you'd have tipped your 110msi 1/2" it would have tightened up appreciably. The 110msi is built to the old NV profile with updated materials. I'm not sure i'd even overly recommend the 95msi Black to a low ball hitter just yet. The 95msi 70 was quite penetrating in my JS and the Black 80 hits penetrating bullets in a 3Deep.

Can't wait to take the hybrid version for a burl :D
Maybe I was drunk the whole time.

[TheNuclearOne]

Just needed to tip it as advised from the start.

[oldracer]

I have the Elements RK which is the mid launch version. I also have a tour blue ATX 65S. Tour Blue is nice, but not a patch on the elements. The rogue is also a much better shaft than the blue.

In my opinion, the Attas series is up there with the AD series, but are able to be found a lot cheaper.

Also look for the Elements Earth - this is the US version of the Elements MK.thanks for info Benno, u master HO, have a spare adaptor for a newly acquired BB Alpha 815, looking for an alternative to the Speeder 565 in it, cheers

[Shane788]

The Black 80 hits penetrating bullets in a 3Deep.

I put my 70 in a 13* 3Deep head and holy shit that thing is a canon!

[oldracer]

I put my 70 in a 13* 3Deep head and holy shit that thing is a canon!3 deep 13* head is hot

[Shane788]

3 deep 13* head is hot

Yeah I knew the were pretty hot, but it's a really good combo with that rogue 70.

[oldracer]

Yeah I knew the were pretty hot, but it's a really good combo with that rogue 70.must be the 7's...got a 7M3 in mine, certain driver replacement at times, hit it well Shane

[TheNuclearOne]

I put my 70 in a 13* 3Deep head and holy shit that thing is a canon!

Not surprised one bit. I'm getting a bit of a "thing" for these Rogues.

[oldracer]

Not surprised one bit. I'm getting a bit of a "thing" for these Rogues.must be the 3 deeps JT :wink:

[TheNuclearOne]

must be the 3 deeps JT :wink:

Great shaft too, this one goes better than previous ones ;)

[mrbluu]

Great shaft too, this one goes better than previous ones ;)
I got a 110 70 to try. Do u think I will need to tip it??

[TheNuclearOne]

I got a 110 70 to try. Do u think I will need to tip it??

Depends on about 113 things. But going by how mine is playing i'd not be tipping it before playing it, particularly if you're putting it into your underweight JS.

[oldracer]

I got a 110 70 to try. Do u think I will need to tip it??have to hit the gym B, pushing those numbers

[mrbluu]

have to hit the gym B, pushing those numbers
I have been mate, I'm really smashing out those 5lbs bench presses!!!

[Shane788]

Tip it an inch then sell it to me Binh! Haha

[mrbluu]

Tip it an inch then sell it to me Binh! Haha
That's the plan [emoji13]

[oldracer]

I spent some time this arvo dialling in the BB Alpha 815 that I wasn't that impressed with with the few hits I had with it last night. It has a tipped Speeder 565 in it so I was looking for an after market upgrade when I resurrected this thread. After sorting out my settings with this driver, it is awesome!!! I back to backed my Srixon 545 with AD BB6 with the Bertha as a comparison and the tipped Speeder performed almost exactly as the BB6, the load and release felt identical. The setup of the Bertha feels great at address, not sure of the swing weight, the sound is pleasing. It is a 9* but I lofted it +1 and +2, worked way better for me as a 10*, could get a smidge of draw when I tried which is what I've been working on so there is plenty of upside with this setup. Interesting, my Pro came out to the range and hit both drivers, said the Bertha was 10 yards further than the Srixon, F... me but guess he's been doing it a long time, I thought they were neck n neck, it was an awesome afternoon.

[3oneday]

The good choppers replace smidge with baby ;)

[mrbluu]

The good choppers replace smidge with baby ;)
U know any??

[benno_r]

I spent some time this arvo dialling in the BB Alpha 815 that I wasn't that impressed with with the few hits I had with it last night. It has a tipped Speeder 565 in it so I was looking for an after market upgrade when I resurrected this thread. After sorting out my settings with this driver, it is awesome!!! I back to backed my Srixon 545 with AD BB6 with the Bertha as a comparison and the tipped Speeder performed almost exactly as the BB6, the load and release felt identical. The setup of the Bertha feels great at address, not sure of the swing weight, the sound is pleasing. It is a 9* but I lofted it +1 and +2, worked way better for me as a 10*, could get a smidge of draw when I tried which is what I've been working on so there is plenty of upside with this setup. Interesting, my Pro came out to the range and hit both drivers, said the Bertha was 10 yards further than the Srixon, F... me but guess he's been doing it a long time, I thought they were neck n neck, it was an awesome afternoon.
Draws are for posers and wannabes Al. How many times we gunna go over this? [emoji3]

[oldracer]

Draws are for posers and wannabes Al. How many times we gunna go over this? [emoji3]i know , I know Benno, but going Both ways is not such a bad thing :wink:

[benno_r]

i know , I know Benno, but going Both ways is not such a bad thing :wink:
Haha touche'.

Ps, guess who else can hit draws (kinda)???

[oldracer]

Haha touche'.

Ps, guess who else can hit draws (kinda)???Getout!!! That would be almost orgasmic

[jimandr]

Haha touche'.

Ps, guess who else can hit draws (kinda)???

I've seen you attempt a draw, and then I've seen you hit a fairly straight one after the first one went out of bounds to the right. I'm not sure what shaft was in the club you hit at the time.

[benno_r]

I've seen you attempt a draw, and then I've seen you hit a fairly straight one after the first one went out of bounds to the right. I'm not sure what shaft was in the club you hit at the time.
Haha yeah, forgot about that one. It wasn't a rogue that time, just a lovely double crossed 5i. Maybe secretly deep down I was looking for some reverse swing.

[Scifisicko]

A mate had the 125 70 in an E8 Beta out on course this morning. I hit a few drives with it and he had to prise it out of my hands. Somehow it kept finding its way into my bag. Im having withdrawls.

[live4golf]

Anyone try tipping these??I used one today in my Jetspeed and it was a touch on the soft side, quite high launching with a fair bit of spin. Think of tipping by 0.5 or 1", has anyone given this a go?? Bluu, was this a 60 or 70?

[mrbluu]

Bluu, was this a 60 or 70?
That was a MSI 110 60 that I sold. I'm currently playing a MSI 90 70 in my SLDR mini.

[live4golf]

That was a MSI 110 60 that I sold. I'm currently playing a MSI 90 70 in my SLDR mini.

Sweet, I find the MSI 110 70s just about right...