PDA

View Full Version : Wanted: 95-105g hybrid shaft - untipped



benno_r
13th May 2015, 09:17 AM
Got a little project on the go, looking for an untipped hybrid shaft 95-105g stiff.

edit: Mid Launch / Mid Spin preferred.

freddy a
13th May 2015, 10:58 AM
Might have something for you mate, I'll check tonight when I get home.

Forecaddie
14th May 2015, 09:24 AM
I have a Miyazaki C. Kua 83 S if you want a lighter shaft. 45.00 + PP. See shaft review below:

http://www.golfshaftreviews.info/index.php/category/categories/miyazaki/

benno_r
14th May 2015, 09:33 AM
I have a Miyazaki C. Kua 83 S if you want a lighter shaft. 45.00 + PP. See shaft review below:

http://www.golfshaftreviews.info/index.php/category/categories/miyazaki/

Good shaft - tipping and condition?

benno_r
14th May 2015, 09:42 AM
Following on from Forecaddie's post - looked at few more hybrid shafts on the website.

Would consider narrowing this down to a GD YS-Hybrid+ shaft, or UST original ATTAS.

JADO75
14th May 2015, 10:23 AM
Matrix Black tie 95 stiff hybrid shaft?

Anfield
14th May 2015, 10:24 AM
How much Jado? If Benno passes of course.

Forecaddie
14th May 2015, 10:42 AM
Good shaft - tipping and condition?
I think I tipped it 1" for a 3 hybrid shaft playing 39 1/2". The shaft length is 38 1/2". .370 tip with torque 2.5 degrees. Condition is excellent. I played with it for a month then installed a steel shaft in my hybrid. Let me know if you want me to post picture.

Forecaddie
14th May 2015, 10:56 AM
I think I tipped it 1" for a 3 hybrid shaft playing 39 1/2". The shaft length is 38 1/2". .370 tip with torque 2.5 degrees. Condition is excellent. I played with it for a month then installed a steel shaft in my hybrid. Let me know if you want me to post picture.
Oh forgot to say that the shaft measured out to be 299 CPMs with the head.

JADO75
14th May 2015, 11:04 AM
Also have an Oban Devotion 85 stiff hybrid shaft with my matching 75 stiff fairway shaft

benno_r
14th May 2015, 11:13 AM
I think I tipped it 1" for a 3 hybrid shaft playing 39 1/2". The shaft length is 38 1/2". .370 tip with torque 2.5 degrees. Condition is excellent. I played with it for a month then installed a steel shaft in my hybrid. Let me know if you want me to post picture.

Might be too stiff if tipped already. I'll ponder


Matrix Black tie 95 stiff hybrid shaft?


Also have an Oban Devotion 85 stiff hybrid shaft with my matching 75 stiff fairway shaft

Are these bad boys tipped any?

JADO75
14th May 2015, 11:17 AM
Not that I know of mate, I bought them about a month ago & haven't touched them. I can measure them later this evening & someone on here might know if they have or haven't

Forecaddie
14th May 2015, 12:36 PM
Might be too stiff if tipped already. I'll ponder





Are these bad boys tipped any?
I found the shaft butt to be soft for my fast tempo- hence I tried a steel shaft for more weight to help with tempo. I, however, am thinking of a driving irons/ iron hybrid, but haven't found a head. Cheers

benno_r
14th May 2015, 01:02 PM
I found the shaft butt to be soft for my fast tempo- hence I tried a steel shaft for more weight to help with tempo. I, however, am thinking of a driving irons/ iron hybrid, but haven't found a head. Cheers

Postage is $8 for under 500g (what I normally do). So $53 posted ok?

Not sure it is going to work in this project, but I have other uses for it if it doesn't.

Forecaddie
14th May 2015, 01:21 PM
Postage is $8 for under 500g (what I normally do). So $53 posted ok?

Not sure it is going to work in this project, but I have other uses for it if it doesn't.
I don't think 8.00 is enough for a box and shaft. So, whatever the postage is + 2.00 for a box is the price. Is that ok?

3oneday
14th May 2015, 01:31 PM
This guy might have some stuff that you could use http://www.ebay.com/sch/shirtdaddy/m.html?item=380965302217&ssPageName=STRK%3AMEBIDX%3AIT&rt=nc&_trksid=p2047675.l2562