C taper wedge shafts; rusty vokey wedges

[backintheswing]

1. 2 x c-taper 120s stiff wedge shafts 33 1/4" long with Callaway ndmc grips $50 plus post or pickup Brisbane.

2. Project X 6.5 8 iron and Pw shafts, suitable to go into a GW, LW. 34 1/4" and 35" long so plenty of length. $25 plus post or pickup Brisbane.

3. Vokey wedge heads as follows. All raw, have been cold blued and now rusting up nicely. Can strip to raw if preferred.

50/8 red saw spin milled
54/10 spin milled (model before red saw)
58/8 red saw spin milled

All in good condition, no gouges etc grooves very good.

$80 for the 3 plus post or pickup Brisbane.

http://tapatalk.imageshack.com/v2/15/03/31/e2a86827a363635fa5b757a969ea03fc.jpghttp://tapatalk.imageshack.com/v2/15/03/31/6c061f44ac2442e970da6aa3596195e0.jpghttp://tapatalk.imageshack.com/v2/15/03/31/4a760491cffb4e8ca682dc43ef72fe75.jpghttp://tapatalk.imageshack.com/v2/15/03/31/58678c087ff29d24e585ec176e31c405.jpghttp://tapatalk.imageshack.com/v2/15/03/31/00f1491f24e67c2a8d9c025159e13cf0.jpg

[backintheswing]

I can post up to 5pm tomorrow. After that pickup in Brisbane only or wait 2 weeks as I will be in the lovely MT Isa working.

[backintheswing]

Any Sydneysiders want any of this gear, I may have a box heading to blue tomorrow.

[2378906]

Bits,

I'll take the Vokey heads - if you can take strip them back to raw.
(To Port Melbourne - 3207). Will send a PM.

[backintheswing]

Bits,

I'll take the Vokey heads - if you can take strip them back to raw.
(To Port Melbourne - 3207). Will send a PM.

Ok, vinegar bath here we come.

[backintheswing]

Wedges sold. Just the shafts left.

[backintheswing]

C tapers gone. Lock her down.