PDA

View Full Version : Wanted: Vokey 58 degree with a shaft around 95 grams


Pinglauncher
20th March 2015, 03:36 PM
Looking for a SM Vokey 58 degrees with a shaft around the 95 gram range.

Anything out there ???
Pinglauncher
22nd March 2015, 03:23 PM
Will consider any 58 degree with graphite or steel shaft around 95 grams. Just cannot settle with the Ping Gorge wedges.
mrbluu
22nd March 2015, 03:35 PM
What to borrow my Cleveland 588 58* with spinner shaft???
Pinglauncher
22nd March 2015, 04:13 PM
What to borrow my Cleveland 588 58* with spinner shaft???

Thanks for the offer but the Spinner is way too heavy. 75 grams graphite in irons so don't want to go more than 100 grams in wedge.
Dotty
22nd March 2015, 06:17 PM
Vokey SM4 60.10 with Dynalite 90R shaft ?

The head is an ex-demo and the shaft is from a set of Cobra pulls from MrBluu's mate. You just have to find someone that can put a .370 shaft into a .355 head.

Alternatively, if can find a .370 wedge head, then you are welcome to the SW shaft.
Dotty
23rd March 2015, 07:04 PM
Want to try a NS PRO 105T reg. out of an AP1 gap wedge?
A mate had one sitting in his dungeon.

(I had a look in Power Golf Castle Hill's barrel at lunch. $19 gets you a True Temper Precision Step 75g steel shaft in an Adams V3 forged SW, but unfortunately it will be .370 tip. Or an unpriced American Open Third Wedge with Maxfli graphite shaft.)
Pinglauncher
23rd March 2015, 07:42 PM
Want to try a NS PRO 105T reg. out of an AP1 gap wedge?
A mate had one sitting in his dungeon.

(I had a look in Power Golf Castle Hill's barrel at lunch. $19 gets you a True Temper Precision Step 75g steel shaft in an Adams V3 forged SW, but unfortunately it will be .370 tip. Or an unpriced American Open Third Wedge with Maxfli graphite shaft.)
Thanks Scott but the 105T will be too heavy at 110 grams.