iron shafts

[Charger]

Im chasing some shafts. Either R flex 3-9 standard length, or S flex 4-pw .5" longer than standard. Parallell tips

Anything out there? Preferred would be TT dynamic gold or KBS tour. Nothing lightweight.

Cheers

[JADO75]

R300's 4-PW standard length from some Ap2's with Titleist grips?

[Charger]

May be a bit short. Will keep in mind.

[Charger]

Forgot to add .370 tip (its a reshaft of cleveland 588tt's)

[mrbluu]

Forgot to add .370 tip (its a reshaft of cleveland 588tt's)
That would make the parallel tips right??

[Scifisicko]

New Rifle FCT 6.0 uncut and .370 3-PW

[Charger]

That would make the parallel tips right??

Yup.

[Charger]

New Rifle FCT 6.0 uncut and .370 3-PW

I'm not familiar with those. Let me look them up.

Cant see any FCT but lots of FCM. Do you know the difference? Are they pulls?

[mrbluu]

Yup.
U haven't mentioned that in your original post.

[goonie]

I've got KBS Tour R .355 4 to 8i, 4i - 940mm, 8i - 893mm + KBS Tour S .355 3i - 953mm, you can have them for $50pp
I'm pretty sure I can include brass shims to fit the .370 heads

[Charger]

I see. Would those lengths be stock?

[Scifisicko]

I'm not familiar with those. Let me look them up.

Cant see any FCT but lots of FCM. Do you know the difference? Are they pulls?

Oops FCM (the flighted version), not pulls and not cut.

[perci]

S200s 4 to P {4 Iron Shaft 37.5" to end of Grip} .355 fitted with Jap Titleist Grips, all near new $70 , can bring to Reddy Bay!

[Charger]

That sounds pretty close Perci. A tad light, but not lightweight. unsure on how that length will pan out. Im very much not a clubmaker. Would that measurement be stock length. Im really after .5 longer.

[perci]

Depending on the Heads you put them in , would play .25 over in most heads !

[3oneday]

No one could complain about a quarter inch ;)

[Charger]

Is it a hassle to put .355 into .370? I was going to get my pro to do it. Does it have an effect in play?

[Hatchman]

Is it a hassle to put .355 into .370? I was going to get my pro to do it. Does it have an effect in play?

Wouldn't think it will effect play as it's a fairly common re-fit.
Will tell you after Saturday's game as I'm doing this very re-shaft right now.
Test fit up with shims had them nice and tight. Glue them up tomorrow.

[perci]

Yep easily done with Shims!

[goonie]

I see. Would those lengths be stock?

I think they are over length, but it will depend what they are going into. I can compare to mine tonight if you like.

[Charger]

OK Perci, i will pull the trigger on the s200's. I see you and I are playing together this Friday - that makes that bit easy to arrange. You dont have any Shims? I presume my pro would anyways, he's the one who will reshaft for me.

I am replacing KBS Tour 90's in stiff if anyone wants them. Brand new. They are 102g lightweight thing. They get up very high. The s200's are 124g. (same weight as r300) but lighter than s300 (130g) Still on the lightside a tad, but should be more manageable.

[perci]

Ok mate will bring them Friday for you to look at , I,ll have a look for Shims mate but your Pro should have some !

What Heads are they going in?

[perci]

.

[Charger]

Ok mate will bring them Friday for you to look at , I,ll have a look for Shims mate but your Pro should have some !

What Heads are they going in?

Cleveland 588TT 4-pw