PDA

View Full Version : Fujikura 757 & Pro 95 pulls still avail.


rick3003
4th March 2006, 10:45 PM
3rd time lucky perhaps?

1. Fujikura Speeder 757 Tour Spec Stiff. New Graphics. Untipped. 43.5 inches. Plays 45 in driver. 1 & 3/4 inch tip prep. As new tour velvet cord grip. $130 + post

3. Fujikura Fit on Pro 95 Pro 3 wood shaft. 42 inches. Plays 43 in 3 wood. 1 & 3/4 inch tip prep. As new tour velvet grip. $100. + post

Check the specs at www.fujikuragolf.com

PM for pics!

Any takers? If not off to fleabay!

Thanks
pt73
5th March 2006, 09:49 AM
PM sent on J33 Hybrid.
rick3003
9th March 2006, 01:14 PM
1. J33 18 degree Hybrid fitted with Fujikura Speeder 904HB stiff shaft. This club was used once and presents as new. Wrong shaft for me. SOLD

2. Fujikura Speeder 757 Tour Spec Stiff. New Graphics. Plays 45 in driver. As new. $130 + post

3. Fujikura Fit on Pro 95 Pro 3 wood shaft. Impulse buy from another OZG member. Owes me $150. Will take a small loss and sell for $100. + post


Thanks
Price Drop!
ren
9th March 2006, 10:49 PM
These are awesome prices for high-end Fuji shafts! Somebody buy them now!!
rick3003
16th March 2006, 09:51 PM
No love for these top end shafts?
miro
17th March 2006, 09:17 AM
Rick I am interested in the Fiton but willlet you know soon.
BrisVegas
17th March 2006, 09:32 AM
1. Fujikura Speeder 757 Tour Spec Stiff. New Graphics. Untipped. 43.5 inches. Plays 45 in driver. 1 & 3/4 inch tip prep. As new tour velvet cord grip. $130 + post


Any idea if this would fit into a 905S bore-through? Or would it end up being too short and stiff??
rick3003
17th March 2006, 11:35 AM
Any idea if this would fit into a 905S bore-through? Or would it end up being too short and stiff??
Not too sure, Surely somebody here would know.

Might also be worth a post on BSG.

I'll see what info I can gather.
rick3003
17th March 2006, 11:36 AM
Rick I am interested in the Fiton but willlet you know soon.
No prob Miro
prmeier
17th March 2006, 11:44 AM
Would need to short shaft the Titleist otherwise it will be too short and too stiff, unless you want it to play closer to an X flex. Should be no problem. Have had it done before on 975J. Just inserted an old tip and finished it off then drilled out the shaft to 1.75 inches and inserted the pullout.
BrisVegas
17th March 2006, 12:16 PM
Not too sure, Surely somebody here would know.

Might also be worth a post on BSG.

I'll see what info I can gather.
don't go to any trouble. I have a "friend" who might be considering re-shafting one of these heads and I only asked out of curiosity.
miro
17th March 2006, 03:47 PM
Rick,

Sorry no further interest.