Some Shafts and a few heads.

[TheNuclearOne]

Matrix 6M3 stiff 43 3/8" gripped low tip prep super condition $115 $105 $100 shipped SOLD

Mitsubishi Kuro Kage Silver 60s 43.5" gripped low tip prep $80 shipped SOLD

Mitsubishi Fubuki 73x real deal tipped 1" 42 13/16" ungripped under 1 1/4" prep $70 shipped SOLD

Mitsubishi Kuro Kage Black 80HY (hybrid!) stiff 39 1/2" ungripped 1 1/2 prep (scratch) $50 shipped SOLD

Fujikura Tour Issue Motore Speeder Tour Spec HB 9.8x 40 1/4" gripped 1 3/8" prep $90 $85 $80 shipped SOLD

Taylormade R1 head only (no cover, tip or toolage) brand spanking new still in TP stickered plastic ARP stamped $96.95 shipped SOLD

[JADO75]

I'll grab the kuro hybrid shaft please

[oncewasagolfer]

Mitsubishi Kuro Kage Black 60s 43" ungripped low tip prep $65 shipped

Is this too short for a driver? Would it play at 44" with a nike tip?

[benno_r]

It would play over 44" in a Nike. I don't have my little black book with me to work out it's playing length, but I know It's over 44.

[benno_r]

It would play roughly 45" in a Nike (found the numbers off an old for sale thread of mine).

[oncewasagolfer]

Ok sounds good do you have any Nike tips TNO?

[benno_r]

I got a spare 4 or so if you are keen

[PeteyD]

i'll take the R1 head

[benno_r]

Is the KK silver tipped? And would you do pickup Saturday or Sunday in Rocky or Yeppoon?

[goonie]

i'll take the R1 head

Dibs on this

[PeteyD]

Dibs on this
Noted

[TheNuclearOne]

I'll grab the kuro hybrid shaft please

Done.

[TheNuclearOne]

Ok sounds good do you have any Nike tips TNO?

45" minimum as Benno said. I actually think it will stretch out further, not far off 45.5" once gripped. No tips sorry.

[TheNuclearOne]

i'll take the R1 head

Done deal Petey.

[TheNuclearOne]

Is the KK silver tipped? And would you do pickup Saturday or Sunday in Rocky or Yeppoon?

Untipped. Worst case scenario is i can leave it at moms in Rocky thru the weekend - $65.

[benno_r]

Untipped. Worst case scenario is i can leave it at moms in Rocky thru the weekend - $65.

Done - PM leisurely sauntering to your inbox.

[TheNuclearOne]

Done - PM leisurely sauntering to your inbox.

Top work Benno. If you want anything else let me know and we'll deal.

[benno_r]

Top work Benno. If you want anything else let me know and we'll deal.

Damn you! What have you got?!?!? Second PM running to your inbox like a kid to a candy store!

[TheNuclearOne]

Damn you! What have you got?!?!? Second PM running to your inbox like a kid to a candy store!

More so talking about what's up already but i can have a look lmao

[PeteyD]

PM me payment details

[TheNuclearOne]

PM me payment details

Done.

[oncewasagolfer]

I got a spare 4 or so if you are keen

How much for one benno?

[benno_r]

$35 posted. 2nd hand Flexloft, with a new ferrule included.

[TheNuclearOne]

OWAG - still interested in the KK60s mate or should i drop the pending? No drama either way.

[oncewasagolfer]

OWAG - still interested in the KK60s mate or should i drop the pending? No drama either way.

I just checked my finances and have too many bills and fa cash atm. Didn't mean to tyre kick sorry.

[TheNuclearOne]

No drama whatsoever mate, cool beans.

[TheNuclearOne]

Sold items updated.

[Matt 3 Jab]

How long would the whiteboard play in an R1 as is??

[TheNuclearOne]

How long would the whiteboard play in an R1 as is??

43.75" by my calculations.

[Matt 3 Jab]

Bit short. Do you have a plug at all??

[TheNuclearOne]

No sorry, last couple i did i used old shaft pieces inside and out.

[TheNuclearOne]

Price adjustment on quite a few items.

[TheNuclearOne]

Final drops.

[mrbluu]

Damn you and your good prices!!!

[TheNuclearOne]

Damn you and your good prices!!!

Buy big brother, they will be gawn very soon :D

[TheNuclearOne]

Just imagine that scorching Super LS 3 wood with the matching driver actually fitted up better! Yowzers!

[TheNuclearOne]

Update, another shaft bargain flies the coop.

[mrbluu]

Just imagine that scorching Super LS 3 wood with the matching driver actually fitted up better! Yowzers!

If it had the tool I would tempted get the LS and the KK ;)

[timah!]

I need to stop reading the pro shop threads...

[Lucasto23]

I will take this please :)

Fujikura Tour Issue Motore Speeder Tour Spec HB 9.8x 40 1/4" gripped 1 3/8" prep $90 $85 $80 shipped

[TheNuclearOne]

If it had the tool I would tempted get the LS and the KK ;)

I still have some Adams awesomeness in the house ;)

You really need to buy a tool, hate to see breakage or strippage on the almighty Super LS!

[TheNuclearOne]

I will take this please :)

Fujikura Tour Issue Motore Speeder Tour Spec HB 9.8x 40 1/4" gripped 1 3/8" prep $90 $85 $80 shipped

Paypal $80 to the same account as a week or two ago and i'll have it hand delivered Monday or Tuesday to the same spot.

[KristianJ]

I still have some Adams awesomeness in the house ;)

You really need to buy a tool, hate to see breakage or strippage on the almighty Super LS!

I've read that the adapters on this year's XTDs are the same as the current TM adapters. Should be a piece of cake luring #binhbaited into a hoing onslaught this time next year!

[TheNuclearOne]

They are the same indeed, this was GREAT news :D

[TheNuclearOne]

Possibly the lowest launch lowest spin most stable shaft for it's weight class on the planet up! This will play more like x flex than stiff. Big on tour.

[Lucasto23]

Money sent and i am hoping this is the case :)

[TheNuclearOne]

Cheers mate, this is a no brainer. You should be thinking about a matching driver shaft ;)

[Lucasto23]

Need to sell first before i start hoing more shafts and picked up a new BB7 to trial shortly in something

[TheNuclearOne]

BB7 go good. These are more stout/stable and lower spin and launch. A real "hitters" shaft. If someone can't get their spin and launch figures low enough with these and a half suitable head they have some serious probs.

[Johnny Canuck]

I still have some Adams awesomeness in the house ;)

You really need to buy a tool, hate to see breakage or strippage on the almighty Super LS!

Is it the same tool that Adams has always used for the weights on the older hybrids?

[Lucasto23]

BB7 go good. These are more stout/stable and lower spin and launch. A real "hitters" shaft. If someone can't get their spin and launch figures low enough with these and a half suitable head they have some serious probs.

Your right about that, trialed a mate 6.2 in a 9 degree sldr at the range last week and struggled to get the damn thin in the air :) Reckon it would be an awesome shaft in a G25 or similar spinny head

[TheNuclearOne]

Your right about that, trialed a mate 6.2 in a 9 degree sldr at the range last week and struggled to get the damn thin in the air :) Reckon it would be an awesome shaft in a G25 or similar spinny head


Spot on, not the shaft for the SLDR lest one has big probs. If ever there was a point and shoot shaft for the big hitter this is it.

[TheNuclearOne]

Is it the same tool that Adams has always used for the weights on the older hybrids?

No idea tbh.

[TheNuclearOne]

I've read that the adapters on this year's XTDs are the same as the current TM adapters. Should be a piece of cake luring #binhbaited into a hoing onslaught this time next year!

This deserved more recognition hahahaha

[TheNuclearOne]

Price drop on the 7.2.

[mrbluu]

This deserved more recognition hahahaha

Nah you are not tricking me again with your cheap prices and awesome stuff!!! :mrgreen:

[KristianJ]

Nah you are not tricking me again with your cheap prices and awesome stuff!!!There's already a box that is destined for Penrith with the KK for Jado and Fubuki for me...it can surely fit another shaft in.

[mrbluu]

There's already a box that is destined for Penrith with the KK for Jado and Fubuki for me...it can surely fit another shaft in.

This must be trolling or baiting KJ, can we get a mod in here please ;-)

[Johnny Canuck]

This must be trolling or baiting KJ, can we get a mod in here please ;-)

Super LS!

[TheNuclearOne]

There's already a box that is destined for Penrith with the KK for Jado and Fubuki for me...it can surely fit another shaft in.

Box leaves tomorrow, it's just common sense that he would match the KK70s in his godlike 3 wood with a KK60s in the driver.

[Johnny Canuck]

Box leaves tomorrow, it's just common sense that he would match the KK70s in his godlike 3 wood with a KK60s in the driver.

Especially at that price.

[TheNuclearOne]

Especially at that price.

If ever something was a no brainer :D

[Johnny Canuck]

You know he's binh thinking about it all day.

[TheNuclearOne]

Certain of it :D

[mrbluu]

. #binhthinkingaboutitalldayandnight

ftfy
:d

[TheNuclearOne]

Last drop on the Speeder TS 7.2 bomber.

After 9pm tonight i will have previously #Binh filling the communal box and it will be sealed.

X - Let me know if you want the LS and KK to go in for $120. No hints who this is aimed at :D

[Peppas]

Nah, X flex is too much shaft for me... oh you meant B :)

[TheNuclearOne]

No X flex in here :D

[Peppas]

No X flex in here :D

Woops I need to learn to read gooder next time :)

[TheNuclearOne]

R1 and W.A. package sent Wednesday.
N.S.W. shaft package sent today.
Anything else sent.


Send'er to the archives mods, the pending deliveries and euphoric results can be posted in there :D

[KristianJ]

NSW package arrived yesterday.

Jado, you want me to drop KK off to you today or I can give it to Mack on Sat.

[Lucasto23]

Hybrid shaft arrived today, thanks mate looks yummy

[KristianJ]

Just opened the box...who bought the Black Tie? I can't seem to find the buyer's post...

[mrbluu]

Just opened the box...who bought the Black Tie? I can't seem to find the buyer's post... Freebie ;-)

[KristianJ]

If not claimed by a certain date and time...:lol:

[backintheswing]

My bet would be jadho

[TheNuclearOne]

Hybrid shaft arrived today, thanks mate looks yummy

Cheers mate, they are awesome looking shafts.

[TheNuclearOne]

Just opened the box...who bought the Black Tie? I can't seem to find the buyer's post...


Shhhhhhhhhhhhhh :D