View Full Version : Sold: Shaft and Shotmaker
Tomson
26th October 2013, 10:36 AM
All sold
All plus postage.
simmsy
26th October 2013, 10:51 AM
Can u hold one of the F's for a bit Tomson.
Tomson
26th October 2013, 10:52 AM
no worries
8081travis
26th October 2013, 10:55 AM
Mate which model Harrison will be work with Oban devotion 6 in titty 913, will combine with FJ icons too if a model suits
Tomson
26th October 2013, 11:01 AM
Is it a stiff? If so I would lean more towards an F. I haven't put one in a devotion before.
Steve57
26th October 2013, 11:01 AM
Tom does the RIP include the AMP tip?
Tomson
26th October 2013, 11:03 AM
Tom does the RIP include the AMP tip?
No it doesn't but I have one spare tip if you want me to put it on, I will put it one for an extra $25 for what the tip cost me.
Steve57
26th October 2013, 11:44 AM
No it doesn't but I have one spare tip if you want me to put it on, I will put it one for an extra $25 for what the tip cost me.Thanks mate but I just checked the specs and it could be too low launch for me. I think I will give it a miss. Thanks anyway. Steve
simmsy
26th October 2013, 11:45 AM
Can u hold one of the F's for a bit Tomson.
Tomson,
shadesy will take this.
his ppl will contact your ppl to arrange the deal.
thanks for holding.
timah!
26th October 2013, 11:57 AM
I'll grab the phenom Tom!
benno_r
26th October 2013, 11:58 AM
I'll take one of the E's thanks mate. PM on its way
timah!
26th October 2013, 12:00 PM
I'll grab the phenom Tom!
And if you have a cell pro tip I'll buy you another of whatever Popper bought you last champs.
benno_r
26th October 2013, 12:01 PM
I got a spare cell tip if you are chasing one Tim, getting pulled off my new Kiyoshi this afternoon.
edit: may not be pro, I'll check.
timah!
26th October 2013, 12:07 PM
Cheers Benno.
Tom, another dumb question, assuming its 'real deal'?
8081travis
26th October 2013, 12:07 PM
Is it a stiff? If so I would lean more towards an F. I haven't put one in a devotion before. It's an x stiff what do you think?
benno_r
26th October 2013, 12:12 PM
Adding to the dumb questions - does the Shotmaker come with the tool?
Tomson
26th October 2013, 01:23 PM
Cheers Benno.
Tom, another dumb question, assuming its 'real deal'?
Tim its a pull from the USA Open Ltd edt Cobra Pro Cell Amp, its specs as a phenom but its a pull from an OEM club. The tip I have isn't a pro tip.
It's an x stiff what do you think?
Yep I would go an F
Adding to the dumb questions - does the Shotmaker come with the tool?
Nope it doesn't come with a tool
benno_r
26th October 2013, 01:26 PM
No drama, I'll still take it...
timah!
26th October 2013, 01:31 PM
Cool, so it's real enough.
Can you give it to Courty to bring down?
JADO75
26th October 2013, 01:47 PM
Soz if its been answered somewhere before but can you insert the shot maker without a tool?
Tomson
26th October 2013, 01:52 PM
Not really Jado but I have heard of others that have done it with out the tool.
Steve
26th October 2013, 01:57 PM
I have a tool, for fitting these you can lend
JADO75
26th October 2013, 02:09 PM
Cheers Steve, is there much to it?
Tomson
26th October 2013, 02:15 PM
Put in shaft and tighten up, pretty much it.
JADO75
26th October 2013, 02:25 PM
Ill grab an F please mate.
Steve, cheers for the hook up
Steve
26th October 2013, 02:26 PM
That's it pop grip, drop in, tighten, replace grip. Or you can use the cutter and cut end of grip, then plug grip. 2 minutes done
8081travis
26th October 2013, 02:55 PM
I'll grab the other F please mate
Tomson
26th October 2013, 03:41 PM
Sorry Jado, 8081travis had dibs on the other f, there is one E left jado if you want it.
JADO75
26th October 2013, 04:15 PM
Balls, don't think the E would hold up sorry.
Thank you for the offer Steve but I guess no need now, cheers.
wizard_of_oz
26th October 2013, 05:21 PM
I'll take the E Tomson, thanks..
Tomson
29th October 2013, 11:16 AM
updated.
Powered by vBulletin® Version 4.1.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.