Fairway Shaft.

[Captain Nemo]

As above, no "made for's".
Want 75-85gm
Mid launch/mid spin or low/mid, or low/low.
Ideally after an Axivcore Green 75 or 85s
Going into a Ping Anser sleeve so 0.355 for my 4 wood, so deosnt need to be 3 wood length
Let me know what you have, ive got plenty as trade bait

[backintheswing]

I have a project x 7c3 real one. Currently in a r9 4 wood.

[Captain Nemo]

mmm, been there done that.
pm me length and what your chasing for it.

[backintheswing]

Will be tonight.

[Captain Nemo]

Ta.
Anyone else, I see a few big names browsing.....:)

[Ferrins]

I have a Project X as well out of a R9 4 wood. Not sure of the specs and won't be able to tell you till Monday.

[3oneday]

Fubuki 73 stiff, 1/2" longer than 3 wood length. Definitely don't want a trade but still not sure I want to offload it.

It will look pretty in my XCG6 3 wood head arriving today.

[Captain Nemo]

I have a Project X as well out of a R9 4 wood. Not sure of the specs and won't be able to tell you till Monday.
Ok Champ, get back to me on Monday :)


Fubuki 73 stiff, 1/2" longer than 3 wood length. Definitely don't want a trade but still not sure I want to offload it.

It will look pretty in my XCG6 3 wood head arriving today.

mmmm, I have that shaft with an R11 Driver, and one for my FCT Hybrid, nice, so are you just taunting me.....:(

[Ferrins]

Got the same in x flex if you want[QUOTE=3oneday;928928]Fubuki 73 stiff, 1/2" longer than 3 wood length. Definitely don't want a trade but still not sure I want to offload it.

[Captain Nemo]

Got the same in x flex if you want.

Too much club for me Champ, you should know that!

[TourFit]

Got an Axiv Green 75 'S' (driver length) and/or an 85 'S' at 3W length....

The 85 has been slightly under tip trimmed, so 'may' need a little more (maybe not, I thought it layed pretty stout)

[mrbluu]

V2 76g??

[Captain Nemo]

Got an Axiv Green 75 'S' (driver length) and/or an 85 'S' at 3W length....

The 85 has been slightly under tip trimmed, so 'may' need a little more (maybe not, I thought it layed pretty stout)


Fit, shoot me $$$ & details, could do some contra for that "head" you where keen on?

V2 76g??
Already Got one with an R11 sleeve.....:?

[mrbluu]

So, get one for the ping too......

[Captain Nemo]

So, get one for the ping too......

Would take me 1/2 hr to pull the TM one and put it on the Ping if i wanted to do that!

[backintheswing]

The 7c3 is 42 1/4" long with a r9 tip on it. So would be 41 3/4" without it.

$65 plus post without tip or trade for something of equal value.

[FoxGolf]

I have a Prolaunch Red stiff if it's of any use to you.

[Captain Nemo]

I have a Prolaunch Red stiff if it's of any use to you.
Normal pro launch or Axis?

[FoxGolf]

Normal Prolaunch.

[Captain Nemo]

Normal Prolaunch.
Not for me, thanks.

[stealth2]

Nunchuck ?

[Captain Nemo]

Nunchuck ?
I already have one, thanks.

[Captain Nemo]

Bumping this.
Would like something for a Ping Rapture 4 wood.
i think its a .350 hosel?

[benno_r]

Gday Titty,

I have either a:
Axivcore 79s, 41.25", 1.5" tip, or
Redboard 73s 44" with extender, .5" tip

Both real deal - I also have a Ping stepped shimming ferrule I'll throw in that will fit it nice and snug in the Rapture (these are 0.355 shafts).

Cheers,
Ben

[Captain Nemo]

Benno,
What colour is the Axivcore and is it "tipped 1.5", or is that just the tip prep length?

[benno_r]

It's a Tour Red, and it is tip trimmed 1.5", which is the recommnded trimming for a 4W (was in a V-steel 4W).

Tip prep is a touch over 1".

Cheers,
Ben

[Captain Nemo]

It's a Tour Red, and it is tip trimmed 1.5", which is the recommnded trimming for a 4W (was in a V-steel 4W).

Tip prep is a touch over 1".

Cheers,
Ben

Ta.
So the Redboard would need to be tipped a touch more (i presume its a driver shaft tipped?)

[benno_r]

I was playing it in a 3W, and from memory, 0.5" is the std trimming recommendation for 3W.

[backintheswing]

Nearly all diamana shafts suggest .5" tipping for 3 wood, .75 " for 5 wood.

[becaben]

Old School:
NV 85 stiff (pink) ??
currently has a 1* TM adapter on it ...

[Captain Nemo]

No thanks.