PDA

View Full Version : Wanted: Miyazaki shaft stiff flex or Cleveland driver with shaft


backintheswing
18th September 2012, 09:09 AM
I have Rick's TL310 head on the way. I am after a stiff flex Miyazaki C.KUA 59 S for it. Or will consider other Miyazaki shafts, even if it comes with a Cleveland head attached.

Let me know what you have.

Would also consider other .350 shafts. Don't really want to shim a .335 into it.

Also after a Ping CFS 4 iron shaft, stiff flex. This is a bit random, but you never know. A few guys have gone down the I20 route, so there might be one kicking around. I have a S57 4 iron head coming and thought I had a 4 iron shaft here, but it is a 5 iron.

Can trade red saw Vokeys as well.
chappy1970
18th September 2012, 09:37 AM
I have one BITS, but it is in a Mashie hybrid, even with a shaft extension it may be too short
backintheswing
18th September 2012, 09:49 AM
It needs to be driver length. If its in a hybrid, would most likely have been tipped as well. Thanks for the offer though.
virge666
18th September 2012, 10:05 AM
not to mention the wrong tip size...
chappy1970
18th September 2012, 10:54 AM
Sorry didn't take that into account.
PShaw
18th September 2012, 06:15 PM
I have a number of them, will check tomorrow and get back to you. $80 posted. Let me know if your keen and I'll pop into work tomorrow and see whats what
backintheswing
18th September 2012, 06:51 PM
Yeah let me know what you have please.
PShaw
19th September 2012, 07:34 PM
59x and 43 s, if you give me a day or so I may be able to get a 59s for you. these are both the c.kua miyazaki shaft
backintheswing
19th September 2012, 07:49 PM
59s would be my preference. I am in no hurry, so just get back to me when you find out. Thanks.
PShaw
21st September 2012, 06:36 PM
Only got 59x, I cycled it today and it cycles at 255cpm which is not that stiff. If you want it its yours, I play soft x flex and raw normal like them cycling around the 265-270cpm if that helps. My clubhead speed is around the 108mph
backintheswing
22nd September 2012, 06:54 PM
I will take the 43S. Just let me know the length first, as I am thinking of tipping it a little. Is it. 350 as well.
PShaw
23rd September 2012, 06:47 PM
The 43s play 46 in the clevelands so I'll measure it for you, and yes its a .350 tip. I am out of the shop tomorrow but will get back to you tuesday with more details
backintheswing
27th September 2012, 08:55 AM
Bump for Peter. Also can you let me know if the 43s has a grip on it, as I have read they are .650 butt end and need a specific grip that size.
PShaw
27th September 2012, 10:38 AM
Bump for Peter. Also can you let me know if the 43s has a grip on it, as I have read they are .650 butt end and need a specific grip that size.

I can leave the cleveland grip on it for you as it is still there and new for the 43s, could be the best bet as all I have in the 59 range is x flex.