Scotty refinishing

[pingmanjas]

After some advice i have a couple of old TEI3 Scotty Camerons that I would like to get refinished. Who should I go to? What's it cost?

[BayBum]

Kari Lajosi

http://www.ozgolf.net/showthread.php/13256-A-brilliant-Aussie-custom-putter-maker?highlight=kari
http://www.ozgolf.net/showthread.php/30140-Putter-finish?highlight=kari
http://www.ozgolf.net/showthread.php/30641-Looking-for-a-different-putter-finish...?highlight=kari

I have my putter on it's way there at the moment ! Im super amped !

[hocko]

Lajosi putters.
No more to be said.

[Captain Nemo]

Not worth sending 1 to the Custom Shop
Send it to Kari
http://lajosiputters.com.au/

[BayBum]

First ! :lol:

[timah!]

Search function. It's awesome.

[mike]

Use hunny.

[davepuppies]

i think i will use kari when my TEI3 arrives.....

[mike]

After some advice i have a couple of old TEI3 Scotty Camerons that I would like to get refinished. Who should I go to? What's it cost?You could also PM Dotty. I've seen his work. Very good.

[Captain Nemo]

If your serious about it I have 2 going to the Custom Shop you could throw it in my order...

[AlexMc]

L - when are you sending your putters over? I have a TEi3 that I want to send over as well...

[Captain Nemo]

I've bought 2 heads just recently.
They where sent to my US guy....
If you want in let me know ASAP

[AlexMc]

I want in :)

PM me with what I need to do and I'll get it done.

[Captain Nemo]

I'll sort it out tommorrow
Just get the head pulled and start working out what grip/shaftband h/c length etc......

[pingmanjas]

If your serious about it I have 2 going to the Custom Shop you could throw it in my order... Titleist so you just send the head and they do the rest for you with the specs you give?

[Captain Nemo]

Correct.
Very expensive for just 1
Well the cost of doing it is worthwhile but the shipping of 1 back is the same as for 3-4 putters as they send it in one of their big yellow boxes, works out to be around $60-70....

[timah!]

Standard triple black grip? ;)

:lol:

[Captain Nemo]

I have one.....
Going on my golo!
I'll track you one down.

[pingmanjas]

Correct.
Very expensive for just 1
Well the cost of doing it is worthwhile but the shipping of 1 back is the same as for 3-4 putters as they send it in one of their big yellow boxes, works out to be around $60-70.... On average what do they charge to refinish it back to stock? My TIE3 Newport was my coaches at the time and It has had all the black sanded off it and has been smacked around a bit to make it sit more shut.

[Captain Nemo]

All info here:
http://www.scottycameron.com.au/customization/default.asp
Ti3's and Buttonbacks etc cost more to get redone due to the face insert....

[pingmanjas]

So many options on there. Realistically all I want is to get it put back stock standard original condtion. I read on there that they will only work on original finishes since mine has been sanded and gas different paintfill will it still be ok?

[Dotty]

You could also PM Dotty. I've seen his work. Very good.
Nope. Steel is too hard for a 100mm angle grinder.
I see SC copied my 2009 Anser Notchback for the Jetsetter limited edition and 2012 Newport Notchback. ;)

btw. The original went with a bag of clubs to QAGA, which I thought was ironic for a putter with a bit missing. (I've since bought another bronze anser, and used lead to give the look of the notchback, as well as doing similar on a Yes with double-bend shaft.)

[Hux]

So are you saying its $60 each putter or a total of $60 for all putters to come back to Aus? Then obviously Sydney to Brisbane.....

I have an original Napa I would like restored. Could just send you down the head?

[Captain Nemo]

Hux sorry Alex has jumped in so I have no more room?