PDA

View Full Version : Wanted: Sets for my FIL and BIL



Scottt
2nd September 2012, 07:40 PM
My father-in-law and brother-in-law are looking to upgrade their clubs, and are looking for pretty much everything.

FIL will need reg flex, and draw bias in the driver and hybrids would be a strong consideration. Graphite shafts in the irons wouldn't hurt as he has a slightly dodgy right elbow that could benefit from less weight.

He's after a driver (maybe 11 or 12 degree wouldn't hurt), 18-23 degree fairway wood, 4 and 5 hybrids, 6-P irons, a sand wedge and a putter. Irons should be moderate cavities.

BIL will need stiff flex, neutral bias is fine.

For him, I'm chasing a driver, 17-18 degree fairway wood, 4 hybrid and 5i through PW, plus sand wedge and putter. Will also need cavity irons, not too shovelly.

Sand wedges can be part of the iron set if that's what you have.

They don't need anything super flash, but don't want to buy shite. Let me know what you've got.

BroKar
2nd September 2012, 08:17 PM
What's the budget on the stiff set?

mackie
2nd September 2012, 08:20 PM
Hey Scottt
FIL clubs - TM Burner Rescue 19* reax 60g Flex M $20
BIL clubs - Irons Bridgestone J38 DPC, w/nippon 1050, 4 - PW Stiff 9/10- $240 (did i buy these from you :D), Drivers -Titleist 905T 9.5 speeder stiff w/hc. 7.5/10, $50, 905S 8.5 Graf Blue S, 7/10 $50. Both GPMC grips vg condition.
Fairways/Hybrids -Titleist 904f 19* graphite design ys6 Stiff, w/hc, 8/10 $30. Titleist 503h 19* NV stiff shaft 7.5/10 $20, wilson Dh6 16* V2 stiff hybrid shaft $20 7/10
all plus post
Cheers

Scottt
2nd September 2012, 08:39 PM
Maybe not a bad set of irons for the BIL, those Bridgeys.

BroKar - not really sure. He won't want to spend a pile. Probably depends on what I can find for him.

AusOdy
3rd September 2012, 11:57 AM
Adams A4R 4 hybrid, Adams V3 forged iron set in reg (5, 6 hybrid graphite, 7 semi hybrid, 8-GW iron)

Stuartd147
3rd September 2012, 12:47 PM
FIL - Srixon I-302 3-PW with Srixon reg light shafts 1" over. Heads are 8+/10 can cut shafts for you to length but you will then need new grips... $150.
FIL - Ping Rapture V2 12* head in VG++ condition that I can put a TM xcon-5 regular driver shaft in for you..$100
FIL - RBZ 5 wood with xcon-6 reg shaft, head is 7/10 and slightly closed...$100
BIL - Mizuno MP650 9.5* 44.5" driver with Accra Z Tour stiff shaft in 9/10 condition...$220
BIL - Nike VR Tour 10.5* 45" driver with Project X 5.5 in 8/10 condition...$100
Either - Sureshot Pinloc 1000, hardly used.... $170

...all + postage...stu

IanO
3rd September 2012, 12:55 PM
Set of Callaway X-Forged Cavity back (3-PW) with S300 shafts - $200 plus postage

Johnny Canuck
3rd September 2012, 01:02 PM
I still have the Adams 12* head that we talked about ages ago. Completely forgot about it. A cheap option if you need it.

Scottt
4th September 2012, 09:03 PM
Thanks guys, a few options to think about. Will chat to the lads and get back to you.

Scottt
6th September 2012, 09:29 PM
Mackie, Stuart, AusOdy. Definitely keeen on some of yopur wares.

AusOdy - how much forn the Adams hybrid iron set?

AusOdy
6th September 2012, 10:51 PM
Mackie, Stuart, AusOdy. Definitely keeen on some of yopur wares.

AusOdy - how much forn the Adams hybrid iron set?

pm replied

Scottt
10th September 2012, 10:39 AM
BIL is a dick and went and bought a full set from a shop because he didn't want to wait.

Have sorted FIL with hybrids, irons and wedges. Will talk to him at the weekend re: driver and putter.