PDA

View Full Version : Wanted: Iron shafts


3oneday
28th July 2012, 07:01 PM
4 to wedge, prefer new as they are going into pings so I don't want skanky bits hanging out the tips. AWT seem too soft and spinny when I'm swinging properly.

Stiff or stiff plus, PX 6.0, Dygold S400, would consider X100 in 3 to wedge as I can softstep. Feeling like getting fairdinkum again.

Let me know if anything around, I'm in Sydney.
Captain Nemo
28th July 2012, 07:14 PM
KBS Tours.....
3oneday
28th July 2012, 07:25 PM
Are you providing a recommendation or do you have some ?

My preference is PX, then dygold (tour issue) then whatever else comes along.
hardboiled
28th July 2012, 07:30 PM
Ping CFS in stiff? 3-Lw
3oneday
28th July 2012, 07:32 PM
I'd probably prefer 130 grams minimum, thanks though.
Captain Nemo
28th July 2012, 07:41 PM
Are you providing a recommendation or do you have some ? My preference is PX, then dygold (tour issue) then whatever else comes along. Both.....Was going to try them in my i10's but I've found a possible replacement....
3oneday
28th July 2012, 07:43 PM
Never stuck with KBS to be honest, so I'll pass.
Captain Nemo
28th July 2012, 07:45 PM
Ok
Was actually going to give to you on a free trial basis.... but hey I'm a grubby dealer as some would say.....😱
hocko
28th July 2012, 08:19 PM
I can pull the X100 Tour Issue's from the R9's mate as i may have a sale on heads only?
3oneday
28th July 2012, 08:30 PM
Let me know a price, do you know how long the prep is and are they 3 or 4 to wedge ??
Coyote83
29th July 2012, 10:33 AM
Hey Mate

I have a set of PX6.5 flighted, that i am pulling from a set of Mizuno MP68's they are 3-PW, if thats of interest

Oh forgot to mention they have brand new GPMC grips as well

Cheers

Dan
3oneday
29th July 2012, 10:47 AM
Thanks Dan, not sure on those but I'll do some research.
3oneday
29th July 2012, 12:43 PM
Grabbed some px 6.0 on ebay pretty cheaply, thanks everyone for their input.
Webster
29th July 2012, 12:54 PM
Why S400 and not S300?
LeftyHoges
29th July 2012, 01:32 PM
Why S400 and not S300? Good question, considering S400 are just mostly S300's that are a gram or two too heavy to pass for 300's...
3oneday
29th July 2012, 03:06 PM
Why S400 and not S300?S300 = 5.8 flex in PX, I'd imagine S400 wouldn't be less ?

If I had asked for S200 would you have said why not R300 ? Why is the earth round ?


:)
Foburger
6th August 2012, 01:50 PM
KBS Tour the way to go. Play very heavy to static weight, 125gr S+.

KBS ctsper**
supo67
7th August 2012, 11:28 AM
its actually an oblate spheroid.

DGtour issue s 3-pw + a ute shaft ?