70-80 gram S or X flex driver shaft

[KristianJ]

Probably a long shot, but does anyone have one of these in either S or X flex in either 65 or 75? I'd also be interested in the ST stiff tip variant.

To go in my FT9-TA head, so must be .335.

Or anything that's mid-high kick with the above specs and won't cost me the earth...Graf Blue, for example. :)

[KristianJ]

Bumped, and changed thread title to be a bit less specific.

[HCC]

I doooo! Rip alpha 60s with gripmaster grip.

[KristianJ]

Bump - had found something but the arrangement fell through.

popper, I've still got that Graf Blue under consideration, but I'm thinking a little heavier might be what I'm after. Hence another change to the thread title.

[Anfield]

got a ust v2 made for nickent 76g 3.9 torque, not sure about kick point but its a very solid shaft and fairly cheap.

[timah!]

KJ, try and find yourself a full length MFT 'ahina and tip it. Will fit the bill easily...

[popper81]

Bump - had found something but the arrangement fell through.popper, I've still got that Graf Blue under consideration, but I'm thinking a little heavier might be what I'm after. Hence another change to the thread title. No worries mate..

[timinsa]

I might have a cheap new graf Epic at 90 gm.

[JADO75]

KJ, try and find yourself a full length MFT 'ahina and tip it. Will fit the bill easily...

I do have one of those with no 910 tip on it at the moment! It's a stiff 72gram.
Great call Timmy, by the way, I hope Qld get smashed!

[popper81]

I do have one of those with no 910 tip on it at the moment! It's a stiff 72gram.
Great call Timmy, by the way, I hope Qld get smashed!

NSW are jelly fish mate....;)

[KristianJ]

I do have one of those with no 910 tip on it at the moment! It's a stiff 72gram.Great call Timmy, by the way, I hope Qld get smashed! Could be worth the experimenting with given the localness. How much you want, Jade?

[JADO75]

Hoping to get $40 mate

[JADO75]

NSW are jelly fish mate....;)

Go & get a big banana up you brother! One more sleep till we bash you big girls

[KristianJ]

Hoping to get $40 mate Yeah, can do. I'll sort out a time over the weekend to come visit.

[JADO75]

Happy days mate, just let me know when & where

[KristianJ]

Tim, how much did you end up tipping yours? I saw it plays at 44...I'm not too adverse to having it that short.

[popper81]

Pretty sure Timmy tipped his 1/2inch. I have hit his, IMO it doesn't really feel short if you just pick it up... Feels better than the x stiff ahina I have in my 910.

[timah!]

KJ, mine was a stock 44.5", so I tipped it just the 0.5".
I really don't think it feels that 'short' at all, and now fits my lengths perfectly pretty much through the set.
16985

[KristianJ]

Gotcha. I thought 45 was the stock 910 driver length so that's why I was a little unsure about tippage. I might dig up that launch and spin chart that exists for the different driver shafts and have a look at it...I think it had the stockies tipped a full inch.

[timah!]

Yep, but start with a half and go from there. No point buggering up a shaft if you cut too much straight away.

[TourFit]

KJ...I have a Graphite Design YS-Q 75X .335", BRAND NEW, sitting right here in front of me!!!

PM sent.

[Yossarian]

KJ...I have a Graphite Design YS-Q 75X .335", BRAND NEW, sitting right here in front of me!!!

PM sent.

Right in front of me.


http://www.youtube.com/watch?v=Yn1xwu5h10Q

Looks a bit like SMS actually...

[TourFit]

I'm not that upset about it, Yoss!