The $3000 Callaway Sale

[virge666]

So here is the Story.

I have won $3000 worth of Callaway Kit. RAZR Fit Drivers, RAZR Fit Fairways, Hybrids and RAZR Tour irons, wedges, bag, balls, etc. So I will selling a lot of the stuff I have in stock and older gear and pretty much what is sitting behind me.

Shipping is $12 to eastern states, $22 for the WAnkers.

I will be putting all the photos in a Google Picasa Album . . . here.

https://plus.google.com/photos/114883118739054371109/albums/5730344409922266465

Here is the List . . .

Iron Shaft Sets
Set of NS-Pro 900GH shafts, 5-PW in Stiff. $50
1 x 3-PW Set of Dynamic Gold R300 $80 (pretty much new)

Irons
Cobra CB Pro Irons in 3-PW, Project X non flighted 5.5, STD L/L/L $275
Taylormade TP heads 3-PW $250
Callaway Prototypes 5-PW Heads only $240
Drivers
Cleveland Sl290 9.0 degree with Fujikura Fit on in Reg, this is a strong REG. 45” $70

Fairway Woods
Tour issue Nike SQ 15 degree with Stiff 65gr shaft. 42.5” $60

Wedges

Tour issue RAC TP in 58 degree with 8 bounce, C-Grind. $40
Tour Issue 48 and 54 Wedges Nike Victory red Wedges, cleaned up, rust removed and actually not too bad at all, both with C-Grind & initial stamp. $30 each

60-08 – C-Grind - think it is sold.
Oil Can Vokey SM 56-10 $40

[Tomson]

I'll grab the x100's virge.

[hocko]

I'll have the Tour issue x100's virge.

[hocko]

I'll have the Tour issue x100's virge.
FFS...missed by 60 seconds!
One each Tomo?

[virge666]

I have two sets...

Sound OK ?

[Anfield]

congrats Virge, how did you win all that?

[Anfield]

oh and has that money showed up yet?

[Tomson]

If virge is happy to split them.

[timah!]

Virge, can you hold the 52 and 56 TI vokeys for me?

[virge666]

oh and has that money showed up yet?

Cheers - it has.

I won them with a promotion at Narabeen range. I hope to pick them all up next week, hence the clearance.


If virge is happy to split them.

No prob. PM me some addreses.

[timah!]

Virge, can you hold the 52 and 56 TI vokeys for me?

Actually, I'm a moronic Ho. I'll pass, there's no sensible reason for me to change other than being a spaz.
Apologies.

[excelboy]

Virge, can I test out the chuked R9 tonight?

[backintheswing]

Any .350 fairway shafts

[borby]

Hi Virge

I'll take the Mizuno Fli hi

[Captain Nemo]

Whats the deal Virge, whatever you want, made to measure etc...
Sounds like a nice pickup.

[virge666]

Virge, can I test out the chuked R9 tonight?

Yep - Will bring.


Any .350 fairway shafts

Yep - reg or stiff ?


Hi Virge

I'll take the Mizuno Fli hi

Done... PM me an address


Actually, I'm a moronic Ho. I'll pass, there's no sensible reason for me to change other than being a spaz.
Apologies.

Yes there is... you NEEEEED to.


Whats the deal Virge, whatever you want, made to measure etc...
Sounds like a nice pickup.

Yep 2 hours at the Cally fitting center and a big spec sheet of STUFF !

[Croydo]

I'll call dibs on new Razr fit driver :razz:

[virge666]

I'll call dibs on new Razr fit driver :razz:

I have 2 coming.. one in 9.5 and another in 10.5.

Both with Motore F3 shafts.

[Captain Nemo]

Well done mate.
Cally centre at Alexandria?
Have you been there b4, its amazing........

[Bruce]

Ah geez. This is not a good time cash wise.

[AusOdy]

Set of NS-Pro 900GH shafts, both in Stiff and Reg – 12 shafts, plus ½ inch

reg set tip size? mine is Adams A4R and not sure if fits

edit: i need .370

[timah!]

Yes there is... you NEEEEED to.

Not helping.
:lol:

[virge666]

Well done mate.
Cally centre at Alexandria?
Have you been there b4, its amazing........

Yeah it looked OK, but I wasn't a big wrap. the hitting platform is built on wood and carpet. Would have preffered a proper mat.

Cool tech though...

[virge666]

Set of NS-Pro 900GH shafts, both in Stiff and Reg – 12 shafts, plus ½ inch

reg set tip size? mine is Adams A4R and not sure if fits

Will be 355 taper.

Not sure on the adams stuff anymore... anyone else know ?

[excelboy]

CheerS Virge

[virge666]

Ah geez. This is not a good time cash wise.

I can offer terms...

:)

[AusOdy]

Will be 355 taper.

Not sure on the adams stuff anymore... anyone else know ?

no good for me, need .370. GLWS

[virge666]

no good for me, need .370. GLWS

I ahve some shitty old REG Lites from a a taylormade set... if you pay shipping - they are your...

but they are an old set...

[lukemc]

I'm interested in the R9 with chuck if it doesn't sell tonight

[AusOdy]

I ahve some shitty old REG Lites from a a taylormade set... if you pay shipping - they are your...

but they are an old set...

thanks for offer and i'm good

[blurry]

I will take the r9 rescue , pm the details and I will transfer today .

cheers Blair

[virge666]

I will take the r9 rescue , pm the details and I will transfer today .

cheers Blair

Sorry mate Shadey got it.

[blurry]

ok , no problem

[Captain Nemo]

Yeah it looked OK, but I wasn't a big wrap. the hitting platform is built on wood and carpet. Would have preffered a proper mat.

Cool tech though...

Yeh, i went years ago, same stuff as at Cally US Headquarters....

[HCC]

FLI HI sold Virge?

[Pinglauncher]

Virge, I will take the 52 and 56 Red Saw Vokeys

[virge666]

FLI HI sold Virge?

Yep gone !!!


Virge, I will take the 52 and 56 Red Saw Vokeys

Righto then

Will box them up tonight with your new driver.

[virge666]

Virge, I will take the 52 and 56 Red Saw Vokeys

Collis has dibs on the 52 wedge...

i will give him 90 minutes to reply.

[Pinglauncher]

Are the Nippon wedge shafts 950GH or 900 ???

If they are 950 regs are they being sold separately. Would prefer to play lighter shafts in wedges

[virge666]

Are the Nippon wedge shafts 950GH or 900 ???

If they are 950 regs are they being sold separately. Would prefer to play lighter shafts in wedges

Will give them to Dotty. You can take your pick of the regs.

And they are 950

When are you going to drag your arse out to narabeen ?

[Pinglauncher]

Will give them to Dotty. You can take your pick of the regs.

And they are 950

When are you going to drag your arse out to narabeen ?

Sooner rather than later I hope. Getting time away from work is Impossible at the moment and 3 kids take the rest.

[Dotty]

Don't forget the Dotty Courier Service mission statement - 'No care. No responsibility.'

[virge666]

Don't forget the Dotty Courier Service mission statement - 'No care. No responsibility.'

"And things I like may get lost"

[Pinglauncher]

Don't forget the Dotty Courier Service mission statement - 'No care. No responsibility.'

Yeh Yeh as always

" what's mine is yours or eventually will be "

And somewhere down the track comes back to me.

[Dotty]

I'll put them straight in my bag and give you the cash tomorrow in the office carpark. You will save yourself six months of indecision and having to post pro-shop ad. :)

btw. Your Tour Edge irons and PeteyD's wedges had 4 over off the stick around Royal Marrickville last Friday.

[JADO75]

I'll take the oil can 52 please mate, cheers

Sorry, didn't read the above posts.

[Croydo]

I have 2 coming.. one in 9.5 and another in 10.5.

Both with Motore F3 shafts.

Let me know when you get them I'm keen to have a bash.

[Haystacks]

Brand New Mizuno MP-R12 56-13 Quad Cut $80

Hey Virge, I'll take this...are you home tomorrow (Friday?)

I have to pick up my boy from the footy academy at Narabeen at about 1.30pm. I could come out prior and pick up COD if you're home.

[teckee7]

Hi virge are the tm tour prefer irons with ns pro shafts still available? If so I will take dibs on them. How about the the ns pro shafts, what is left over?

[virge666]

The 09 Tours are all yours tekee, I have 5-PW in NSPRO Stiff

Haystacks. You know the address. See you tomorrow

[virge666]

Gents,

I have updated the first post - time to start the lowballing.

Bring it !

[Sydney Hacker]

$200 for the Cobras...

[virge666]

$200 for the Cobras...

Nice try, but I have Bruce coveting them and depending on circumstances, these will probably go and a better price than $200.

Persuade me more...

[Sydney Hacker]

Nice try, but I have Bruce coveting them and depending on circumstances, these will probably go and a better price than $200.Persuade me more...Hey just trying to get the bidding going for you, you did ask for low balls! Would it help if I said please?

[Yossarian]

205 for the cobras.

[virge666]

205 for the cobras.

Sold !

$75 shipping to WA.

[HCC]

Australian Air Express to WA?? haha

[DrBob]

Set of Project X 6.0 with Ping grips. $100

Will these fit G5's?

If so, interest at $80 posted to Qld?

[virge666]

Set of Project X 6.0 with Ping grips. $100

Will these fit G5's?

If so, interest at $80 posted to Qld?

G5 Jet ??

[Haystacks]

Set of Project X 6.0 with Ping grips. $100

Will these fit G5's?

If so, interest at $80 posted to Qld?

Is that Dr Bob Brown?
Why did you move to Queerland?
Wait...never mind.

[paulyboy]

Dr Bob Brown likes stiff shafts, so I'm thinking the 6.0's might work.....

[DrBob]

Wrong Bob.

Still interested in buying them if you are interested in selling them.

[virge666]

Wrong Bob.

Still interested in buying them if you are interested in selling them.

As long as you require 355 taper...

95 posted

[DrBob]

Virge,

3 to PW? Looking to soft-step so need at least 3 to 9.

Thanks

[virge666]

Virge,

3 to PW? Looking to soft-step so need at least 3 to 9.

Thanks

yes mate !

Brand new grips too.

[virge666]

All items have been shipped..

Any love for what is left ?

[adamsgolfer]

What kind of shaft can you stick in the burner? Need a softer stiff or firmer reg....something that is mid launch perhaps tip stiff.....driver ss is 92-95mph if that helps.

[adamsgolfer]

What kind of shaft can you stick in the burner? Need a softer stiff or firmer reg....something that is mid launch perhaps tip stiff.....driver ss is 92-95mph if that helps.

can pay extra for shaft upcharge if need to

[Sydney Hacker]

My offer still stands for the Cobras, will even pick them up...

[virge666]

My offer still stands for the Cobras, will even pick them up...

Do you want the shafts as well ?

[KristianJ]

Random off topic question of sorts, Virge...is that my 906F2 in the middle of pic 51? How'd the Altus go in it?

[virge666]

can pay extra for shaft upcharge if need to

leave it with me...

Might have something like a slightly heavier REG that woudl do the trick...

[virge666]

Random off topic question of sorts, Virge...is that my 906F2 in the middle of pic 51? How'd the Altus go in it?

Might be . . . ;)

It is loaded but I have not hit it yet. I think the glue was just dried then and waiting for a grip.

[KristianJ]

Might be . . . ;)

It is loaded but I have not hit it yet. I think the glue was just dried then and waiting for a grip.

Hehe...fair enough. No rush - I'm pondering the VR wedge heads and could do with some thinking time. :p

[Sydney Hacker]

Do you want the shafts as well ?I don't know how I will go throwing the club head at the ball, so probably would need the shafts too ;)

[virge666]

Hehe...fair enough. No rush - I'm pondering the VR wedge heads and could do with some thinking time. :p

Yeah - dont rush on them... I have cleaned them up and they are my gamers now... the 60 degree is stupid easy to hit high and spin


I don't know how I will go throwing the club head at the ball, so probably would need the shafts too ;)

Well in that case you will need about $260 if you want the shafts as well.

[excelboy]

Virge, if no one grabs the Vokey 60 in the meantime could you take it to the range on thurs, will head up for a hit if the weather holds - are there undercover bays at all?

Chuked R9 worked a treat, hit 12 of 14 fairways at Magenta, which is a fair result given my swing!

[virge666]

Virge, if no one grabs the Vokey 60 in the meantime could you take it to the range on thurs, will head up for a hit if the weather holds - are there undercover bays at all?

Chuked R9 worked a treat, hit 12 of 14 fairways at Magenta, which is a fair result given my swing!

No problem at all... Cu then.

[goonie]

Taylormade Burner in 10.5 head only or I can put any flex shaft in for free. $50

Which Burner is this?

[virge666]

Taylormade Burner in 10.5 head only or I can put any flex shaft in for free. $50

Which Burner is this?

Old one... see photos.

before superfast.

[virge666]

Prices Updated... trying to get rid of the rest.

Keeping the Tour Preffered - they are just too good.

[qbnchopper]

Lets see if I can keep my record of asking virge some questions and not buying from him (I think I am 1 for 5 now with the 1 being some shafts)...

What are the faces of the ProCBs like v666 - looked at the pikkies and couldnt see them ?!?!?!

[virge666]

Lets see if I can keep my record of asking virge some questions and not buying from him (I think I am 1 for 5 now with the 1 being some shafts)...

What are the faces of the ProCBs like v666 - looked at the pikkies and couldnt see them ?!?!?!

Ha !!!

They are absolutley fine. No real wear marks.

The 3 and 4 iron are hardly used... I will try and get a photo or a few of the others.

[golf hack]

Will you take 250 for the cobras. plus postage to brizzy

[virge666]

Will you take 250 for the cobras. plus postage to brizzy

Yes, Yes I would.

[golf hack]

Yes, Yes I would. Send me some bank details and ill organise payment first thing tomorrow morn. Cheers nathan

[virge666]

Send me some bank details and ill organise payment first thing tomorrow morn. 0425458616Cheers nathan

Will do. Cheers