x flex driver shaft for mate.

[Ferrins]

He is currently using a ping g10, with a pro-launch red stiff shaft. Went to the range, and found out his swing speed is over 120mph, and was told to use an x-flex shaft as there is too much torque with a stiff shaft. Is this the case? what shaft to ppl recommend?

[CanuckDownUnder]

120 mph! you're looking at XX. Got some for sale . Cheap.

[Ned]

Got a Diamana Whiteboard!

[Johnny Canuck]

Hot pink Aldila NVS 55x.

[Ferrins]

120 mph! you're looking at XX. Got some for sale . Cheap.

Good 0, what super duper shaft you got? He's keen.

[Yossarian]

Hot pink Aldila NVS 55x.

I'd love to have the game for this.

[virge666]

He is currently using a ping g10, with a pro-launch red stiff shaft. Went to the range, and found out his swing speed is over 120mph, and was told to use an x-flex shaft as there is too much torque with a stiff shaft. Is this the case? what shaft to ppl recommend?

How long is his g10?

[BrisVegas]

Graf blue x flex was what ubers was using last time I saw him. He's 120+mph on average and reckons the blue is one of the only shafts he can rely on.

[markTHEblake]

http://www.ozgolf.net/showthread.php/19265-Diamana-Red-73-x5ct-X-Flex-%28Used%29

[CanuckDownUnder]

i was using a graf blue x and they are stiff as. the fuji Kamo shafts are very similar just a higher kickpoint imo

[peter_rs]

So how was the speed measured.

How does he hit the g10 how? High, low, hook, draw, cut or block. Or is there no pattern?

Was the 120 flat out?

What does he want the g10 to do? Is it stock?

[Ian_Golf]

He is currently using a ping g10, with a pro-launch red stiff shaft. Went to the range, and found out his swing speed is over 120mph, and was told to use an x-flex shaft as there is too much torque with a stiff shaft. Is this the case? what shaft to ppl recommend?

I have 2 X-Flexes.:

1 X Misubishi Javelyn - Lower more piercing trajectory.
1 X TM Rombax - Mid launch.

You can have them for $45 each or $80 for the 2. Postage about $12 extra

[Ferrins]

Thanks for the responses and I will relay the information, questions and offers to him tonight.

[virge666]

I have quite a few X flex Accra and Dymatch shafts left.

Depending on weight though.

[rubin]

Graf blue x flex was what ubers was using last time I saw him. He's 120+mph on average and reckons the blue is one of the only shafts he can rely on.

Mate I'm the 125 - 130 range and I'm using the v2 proforce in x flex and it goes fine. That's at 2.0 torque. I would also recommend the tour version, it's a little lower 1.6 to 1.8

[TourFit]

I'd love to have the game for this.

You do. GHEY...

(Cut it down & put it in your putter).



Mate I'm the 125 - 130 range and I'm using the v2 proforce in x flex and it goes fine. That's at 2.0 torque. I would also recommend the tour version, it's a little lower 1.6 to 1.8

Depending on the machine though Rubin...on that indoor one even I was measuring about 115!!!

[Ferrins]

He had it tested at Victoria Park driving range. I did it there also and I was averaging 96mph.

[Ferrins]

the fuji Kamo shafts are very similar just a higher kickpoint imo
A little less torque and a lot more action:)

[rubin]

Depending on the machine though Rubin...on that indoor one even I was measuring about 115!!!

On the indoor one mate. I didn't even look at the s.s on the outdoor one.

[Johnny Canuck]

On the indoor one mate. I didn't even look at the s.s on the outdoor one.

I find it hard to believe you didn't look at your swing speed if numbers were available. Isn't that your number one concern?

[rubin]

I find it hard to believe you didn't look at your swing speed if numbers were available. Isn't that your number one concern?

It's not my number one concern, but the outdoor one when I was using it had ball speed and some other info on there, I didn't know how to change the screen. The indoor system was better anyway.