Reg shaft .335

[Ferrins]

Around the 80 gram mark
Higher launching stiff shaft would be OK
Got a Penley in my 3 wood and like it so I guess I don't need anything flash.
For a strong 5 wood.

[TourFit]

A 4 wood then...?

[dc68]

.

[Ferrins]

It's the TM R7 TP 17.5* head.

[Ferrins]

A 4 wood then...?

41/2 wood

[3oneday]

I have a reg flex NV85 that plays at 43.5 in a driver. Not sure it's high launching, probably mid.

[morgy]

Mate, I got a Proforce HMOI V2 73g Reg off Simmsy and it sounds perfect for you. Launches stupidly high with very low spin in my 10.5* R9.... hence the reason I just got the 8.5 from 3OD.... Also launches high from my 13.5* 909F2.

I'm not selling mine; however, I would recommend trying one out and I HATE the normal V2 shafts.

[Ferrins]

Thanks mate, I'm seriously confused at the moment to exactly what I need. My swing speed is 97mph and the stock shaft for the R7 TP was 82 grams. This is a titanium head and I want it to go high and not longer than the Burner TP 14.5*.

[TourFit]

Ferrins...I also have the V2 HMOI 75 'S' if you're interested.

Another good option is the VS Proto 80 in an S flex...quite good as a FW shaft IMO. Cheap as chips to get now, too.

Just reading your post...what about the same shaft that's in your 14.5* FW and then just butt trim a little more to bring the distance to where you want/need it to be?

[Ferrins]

I have a VS proto fairway 85 stiff but I thought they were low launch.

[goonie]

VS Proto is mid/low launch, what about prolaunch blue, NVS, V2 HL. Which penley do you have?

[Ferrins]

I have 3 shafts that are all low mid launch.

Ust avixcore red, Diamana 83ct and the vs proto.

[Ferrins]

The Penley is a tour light mid flex.

[Ferrins]

AXIVCore TOUR RED 79 grams

This is a mid high launch shaft so might give it a go. Got the 69 in the driver.

[Daves]

You could also try adding some lead tape to the back of the club head, the lower the better.

[TourFit]

AXIVCore TOUR RED 79 grams

This is a mid high launch shaft so might give it a go. Got the 69 in the driver.



BOOM!




http://www.youtube.com/watch?v=I5rYbTeL_RU

[Yossarian]

goes the dynamite.

[goonie]

I have 3 shafts that are all low mid launch.

Ust avixcore red, Diamana 83ct and the vs proto.

Which Diamana? Want to sell it?

[Ferrins]

Diamana whiteboard 83x5ct Will sell it if it is what your after. $75

Presently in a TM 200 4 wood

[CanuckDownUnder]

just shorten the shaft. had a 43" in it and it went 220 easy

[Ferrins]

Got a Callaway 2004 Big Bertha 7+ 19* with a Speeder 757 x flex and love it. So I think the R7 UST Avixcore combo should workout.

[CanuckDownUnder]

I reckon the the attas t2 it came with is what you're looking after.

[Ferrins]

Have you pulled it yet?

[CanuckDownUnder]

nope.

[CanuckDownUnder]

also have the 70x 43" also from my driver. either one is 50+ shipping so $60 will do.

[CanuckDownUnder]

but I'll just bring it for the 19th

[Ferrins]

What length is the R7 playing at. I'm assuming 43' from your previous post.

[Ferrins]

but I'll just bring it for the 19th

That would be great, I'll have swoosh on the range. Give you the cash if it works and if not the pro could pull it.

[CanuckDownUnder]

yes 43.5 to be exact. sounds good

[goonie]

Diamana whiteboard 83x5ct Will sell it if it is what your after. $75

Presently in a TM 200 4 wood

If it was a blueboard I would grab it.

[CanuckDownUnder]

actually the 7X plays 44.5"

[Ferrins]

Callaway 2004 Big Bertha 7+ 19* with a Speeder 757 x flex

This is playing at 41.5' and the shaft is a low-mid launch with mid-high bend around the 80gram mark

[Ferrins]

I'm going to put the UST Avixcore red in the Burner TP and keep the Attas in the R7 and maybe butt trim it later.

[CanuckDownUnder]

cool

[Ferrins]

also have the 70x 43" also from my driver. either one is 50+ shipping so $60 will do.

Cheers for this offer, have transferred the $60 for the shaft to remain in it.

[Ferrins]

Did you get my PM,s, Ian. Address etc

[CanuckDownUnder]

My inbox was full and just cleared it. My bad