Final clearance

[Courty]

Time to get off my butt and clear the racks. I have no further use for these clubs, so they've got to be moved. I don't have much room to move due to the cost of shipping from up here, so I reserve the right to ignore lowballs. 8)

I will throw in a small bonus with each sale (unless sold to a lowballer).

Item 3 - SALE PENDING
Taylormade Burner Rescue 23°
Shaft: stiff Matrix Ozik Altus Hybrid
Grip: Golf Pride Tour Velvet Cord.
Headcover: generic Taylormade hybrid headcover
Condition: The head is well-used, it has wear marks on the face and some gouges on the sole. There are a few small scratches in the paint at the top of the face.
Price: $60 shipped to East Coast
Pics: 1 (http://imgur.com/twxVf.jpg) 2 (http://imgur.com/dnsWH.jpg) 3 (http://imgur.com/tliHJ.jpg) 4 (http://imgur.com/e9yzK.jpg) 5 (http://imgur.com/BPsDm.jpg)

-------------------

Item 2 - SOLD
Taylormade V-Steel 15°
Shaft: Graphite Design Aura Gold
Grip: Golf Pride Multi-Compound white/ black (2 wraps)
Headcover: generic Taylormade fairway headcover
Condition: Shows expected face/ sole wear for a club of its age. Has a few small scratches around the outside edges from being dropped (not visible at address). Small rub mark on the shaft from sitting in the bag.
Price: $80 shipped to East Coast
Pics: 1 (http://i.imgur.com/3TI3H.jpg) 2 (http://i.imgur.com/9G0GZ.jpg) 3 (http://i.imgur.com/0eTDr.jpg) 4 (http://i.imgur.com/ikUqd.jpg) 5 (http://i.imgur.com/dmPV7.jpg)

Item 4 - SOLD
DGS300 pulls (3-9 iron) played standard length in MP32s
Condition: Shafts have barely seen use and are therefore in excellent condition. Still have grip tape (2 wraps).
Price: $40 shipped to East Coast
Pics: 1 (http://i.imgur.com/mYGrh.jpg)

Item 1 - SOLD
Taylormade Burner Superfast TP 9.5°
Shaft: x-stiff made for Matrix Ozik HD6 (plays soft to flex)
Grip: Golf Pride Multi-Compound white/ black (2 wraps)
Headcover: genuine original 'TP' badged headcover
Condition: Other than a few tiny paint chips on top of the face (not noticeable at address), there is only the wear marks you would expect to see (face & sole) from several months of regular use.
Price: $200 shipped to East Coast
Pics: 1 (http://i.imgur.com/Z6zPV.jpg) 2 (http://i.imgur.com/1osS1.jpg) 3 (http://i.imgur.com/l2OxI.jpg) 4 (http://i.imgur.com/z7eNy.jpg) 5 (http://i.imgur.com/m3nQW.jpg)

Item 5 - SOLD
2 x Rifle 5.0 w/ Mizuno (Golf Pride) M-21 grips to suit 3 & 4 iron (ex 3oneday) near new - make an offer

Item 6 - SOLD
1 x NSPro-970 R-flex w/ Titleist (Golf Pride) M580 grip to suit wedge (brand new pull) - make an offer

Item 7 - SOLD
2 x DG Wedge flex w/ Mizuno (Golf Pride) M-21 grips to suit wedges (brand new pulls) - make an offer

[Jarro]

Got any good stuff ?

:p

[3oneday]

E-go used to be $10 from Sydney to there, stop bludging on your bro :p

[Courty]

Got any good stuff ?

:p

That's all I got left. :oops:


E-go used to be $10 from Sydney to there, stop bludging on your bro :p

That was before the cyclone/ floods. Now they have to go the long way & pay higher fuel prices. ;)

[Ferrins]

Item 2
Taylormade V-Steel 15°
Shaft: Graphite Design Aura Gold
Grip: Golf Pride Multi-Compound white/ black (2 wraps)
Headcover: generic Taylormade fairway headcover
Condition: Shows expected face/ sole wear for a club of its age. Has a few small scratches around the outside edges from being dropped (not visible at address). Small rub mark on the shaft from sitting in the bag.
Price: $100 shipped to East Coast
Pics: 1 2 3 4 5

I have a VGC V-Steel HC if you would prefer that over the ghey generic one. $16 posted.

[Courty]

I have a VGC V-Steel HC if you would prefer that over the ghey generic one. $16 posted.

Thanks, but as I have no use for the V-Steel anymore, you might be better served offering it to whomever buys the actual club.

[Ferrins]

That is what I was wishing to infer.

[3oneday]

Does a headcover add 15%, buy a sock.

[3oneday]

$20 posted for the Rifle 3 and 4 iron shafts.

[haysey]

$15 for the rifle 3 and 4 iron shafts.


Edit: And I want them posted.

[Ferrins]

Does a headcover add 15%, buy a sock.

I'm hurt, HC withdrawn.

Grab one on the bay instead:)

http://shop.ebay.com/?_from=R40&_trksid=p5197.m570.l1313&_nkw=v-steel+headcover&_sacat=See-All-Categories

[Courty]

$20 posted for the Rifle 3 and 4 iron shafts.

As long as postage costs less than $20, we've got a deal. 8)

[Ned]

Honourable lowballs considered ?

[Courty]

Honourable lowballs considered ?

Depends... try me.

[Ned]

Depends... try me.

When me nuts thaw out!

[Courty]

:lol:

[kpac]

wedge shafts posted to the gc?? how much mate?

[3oneday]

As long as postage costs less than $20, we've got a deal. 8)

ok let me know when you have time. If Haysey's offer is higher he'll pony up the difference.


;)

[Courty]

ok let me know when you have time. If Haysey's offer is higher he'll pony up the difference.

It's not about whose is higher. You got in first (and Haysey is a bloody tyre-kicker :roll:).

[Courty]

wedge shafts posted to the gc?? how much mate?

Same as the shafts for 3oneday, $20 posted should be fine.

[haysey]

It's not about whose is higher. You got in first (and Haysey is a bloody tyre-kicker :roll:).

WTF? No way I'd buy them now, I've had my integrity called into question.

[Ned]

WTF? No way I'd buy them now, I've had my integrity called into question.

At least you didnt get called numnuts!:oops:




:lol:

[Courty]

WTF? No way I'd buy them now, I've had my integrity called into question.

What were you gonna do with them anyway? You don't even play golf anymore. :roll:

[haysey]

I need some more tomato stakes.

[kpac]

good stuff. Shoot me acc details.

[markTHEblake]

How much for the Adams CB1's?

[3oneday]

good stuff. Shoot me acc details.

what, we have to pay for it too ???? :shock:

[LeftyHoges]

Item 6
1 x NSPro-970 R-flex w/ Titleist (Golf Pride) M580 grip to suit wedge (brand new pull) - make an offer


$20 posted to Portland VIC, 3305????

Or can I tie it in with some shafts from Tomson????

[Courty]

PMs sent (except to Blakey :roll:).

[Courty]

1st post updated.

[goonie]

Hows the flight of the TM rescue compared to the Adams? And is it draw biased?

[Courty]

Hows the flight of the TM rescue compared to the Adams? And is it draw biased?

The TM certainly goes higher than my Adams, but it is higher lofted as well. It sets up pretty square for me (ie. good swings go straight).

[markTHEblake]

PMs sent (except to Blakey :roll:).
not for sale yet huh?

ok, I'll come back next week.

[Courty]

not for sale yet huh?

ok, I'll come back next week.

Don't bother Blakey, they're here to stay for much longer than that.

[Courty]

http://i153.photobucket.com/albums/s233/gl-graphics/glitter/b-bump/pBump-5.gif

Price drops!

[goonie]

How about $45 for the rescue? and just bring it with you next time you are down this way? But can you confirm the length.

[goonie]

Make it $70 and i'll take the DG's as well.

[dean0820]

courty, is the Taylormade V-Steel 15° still available?

[Courty]

How about $45 for the rescue? and just bring it with you next time you are down this way? But can you confirm the length.

My next visit probably won't be until the Champs. Can you wait that long? How do you want me to measure the length (I'm unsure of the correct method).

Sorry, the DGs have been sold.

[Courty]

courty, is the Taylormade V-Steel 15° still available?

Sorry mate, V-Steel is also gone.

[Tomson]

You'll need a piece of string, a hammer, and a piece of chalk to measure the hybrid ;)

[Courty]

You'll need a piece of string, a hammer, and a piece of chalk to measure the hybrid ;)

Genius. :roll:

I mean where to measure from/ to.

[Tomson]

Genius. :roll:

I mean where to measure from/ to.

I always thought I was a Genius. Thank you for telling everyone else ;)

Bring it tomorrow and I'll remeasure it.

[goonie]

My next visit probably won't be until the Champs. Can you wait that long? How do you want me to measure the length (I'm unsure of the correct method).

Sorry, the DGs have been sold.

Champs is fine, no golf for me for several more months :-(, unless someone else comes up or down before then.

To measure put the club on the ground with the grooves parallel to the ground and measure along the shaft from the ground to the end of the grip.

[Tomson]

To measure put the club on the ground with the grooves parallel to the ground and measure along the shaft from the ground to the end of the grip.

Thats alittle backyard bob isn't it?

[goonie]

Thats alittle backyard bob isn't it?

I just needed a rough measure, he didn't know how, so I told him a simple way to give me a rough club length, and if done correctly is reasonably accurate and will give me the number I need. Did you want me to ask him to buy some proper measuring gear and do a club fitting course?

[Courty]

I was supposed to measure it with the headcover on, wasn't I? ;)

40 inches.

[Tomson]

Bring it tomorrow and I'll remeasure it.


I just needed a rough measure, he didn't know how, so I told him a simple way to give me a rough club length, and if done correctly is reasonably accurate and will give me the number I need. Did you want me to ask him to buy some proper measuring gear and do a club fitting course?

Was going to give you the proper measurement but you must have missed this.

[goonie]

All good at $45? If so PM bank details.

[goonie]

Hey whats the bonus :-)

[Courty]

All good at $45? If so PM bank details.

Will do shortly, just got the internet back up.

[Ned]

If you get it to me by the 26th may Ill take it with me to Brisbane and Goonie to arrange to collect whilst Im there!

[Courty]

Hey whats the bonus :-)

Did you not see this bit:


I will throw in a small bonus with each sale (unless sold to a lowballer).

:mrgreen:

[Courty]

If you get it to me by the 26th may Ill take it with me to Brisbane and Goonie to arrange to collect whilst Im there!

That sounds like a plan. When are you playing Solarman?

[Ned]

Goonie, picked up your hybrid of the Count today, but I think its bounced out of the back of my Ute on the way home.................what do I owe you for it ????????????:wink:



:mrgreen:

[goonie]

Goonie, picked up your hybrid of the Count today, but I think its bounced out of the back of my Ute on the way home.................what do I owe you for it ????????????:wink:



:mrgreen:

WTF?

[BrisVegas]

he's yanking your chain Lee.

[goonie]

he's yanking your chain Lee.

I was thinking it was pay back for something I said :-)

[Ned]

WTF?

:razz:


he's yanking your chain Lee.

:smt083


I was thinking it was pay back for something I said :-)

:smt064

So anyway, you arent playing for a while, its a noice crub, I need a 4H............