PICS - TourFits' Shop

[TourFit]

Hey guys...managed to get the camera for the day from Mrs TourFit. I attached some pics of the shop/work area...if anyone's interested.

1) Entry
2) Top Of Stairs
3) Display Area
4) Office
5) Workshop From Office

6674 6676 6675


6677 6673

[Yossarian]

Why no pic of the pic of carnoustie.

[TourFit]

1) Swingweighting / Demo Assembly
2) Main assembly
3) TourFit Display
4) Cutting Bench / Shaft Prep


6682 6681 6680 6683

[Johnny Canuck]

Why no pic of the pic of carnoustie.


That picture is worth 1,000,000 words.

[chappy1970]

Fantastic setup

[Yossarian]

That picture is worth 1,00,000 words.

Which equates to about an hour of your time :D

[Johnny Canuck]

Which equates to about an hour of your time :D

Or two grip installs.

[TourFit]

1) Close Up at Linisher / Extractor
2) Grip Station / Freq Analyser / Measuring Ruler
3) Putter Bending Machine (silver) / Loft & Lie Machine
4) Main Assembly

6689 6688 6687

6686

[Yossarian]

That said it is a nice shop. And the work is well done. If only I could post my clubs there...:mrgreen:

[Johnny Canuck]

Noice!

[Bushka]

Hot tomales!

[TourFit]

That said it is a nice shop. And the work is well done. If only I could post my clubs there...:mrgreen:

Who says you can't ???

You pay postage both ways...no problem!!!

[Toolish]

Very nice set up mate!

[TourFit]

why no pic of the pic of carnoustie.


6690

A pic of the pic...as requested! Some are The Old Course though.

Was that the pic you meant Yoss ?? :)

[Johnny Canuck]

6690

a pic of the pic...as requested!

This thread is now 84 pages long.

[TourFit]

I'm NOT going to explain it !!!!

Just click on it. Saves time...LOTS OF TIME.

[Tomson]

Very nice TF

[Captain Nemo]

Great set-up mate, next time im over there will be sure to look you up!

[oncewasagolfer]

Very nice setup Mr Fit!

[Golfnut]

I'm NOT going to explain it !!!!

Go on Fit....just for old time's sake :twisted: and don't skip any of the pics this time!!!

[Dotty]

Will you consider trades?

Very, very nice. (What time does Johanna Griggs and the film crew arrive?)

[TourFit]

Will you consider trades?

Always willing to look at that Dotty...what d'ya have in mind???


Very, very nice. (What time does Johanna Griggs and the film crew arrive?)

Thanks. Johanna can come and visit me ANYTIME...;)

[LeftyHoges]

Nice set up you got there TF!!

Don't happen to stock Callaway adapters, do ya???? (For FT-I LCG model)

[TourFit]

Nice set up you got there TF!!

Don't happen to stock Callaway adapters, do ya???? (For FT-I LCG model)

Are they the i-Mix adapters...? Or are they the 0.350" ferrule adapters...? As far as I know, the i-Mix adapters aren't sold (you'd have to buy shaft/club to get them). If they are the ferrule adapter in 0.350" tip then YES...just got some the other day.

[LeftyHoges]

Are they the i-Mix adapters...? Or are they the 0.350" ferrule adapters...? As far as I know, the i-Mix adapters aren't sold (you'd have to buy shaft/club to get them). If they are the ferrule adapter in 0.350" tip then YES...just got some the other day.

Sorry, should've been more specific. Yes, just the normal adapters, but I'd need one in .335. Unless you can use a brass shim inside the adapter????

[Dotty]

Always willing to look at that Dotty...what d'ya have in mind???

A $125 flat-pack bench from Mitre 10.

Topped with a chain saw that needs servicing, half a bucket of sand, a collapsible chair, a lunch box containing drill bits, some foam rubber from council cleanup, multiple chip wrappers from the back of the car, a near-empty bottle of sunscreen, a tin of paint thinners, the broken clip from a ...

[TourFit]

Sorry, should've been more specific. Yes, just the normal adapters, but I'd need one in .335. Unless you can use a brass shim inside the adapter????

I have a 0.335" Cally ferrule/adapter as well. PM me your address and I'll forward it on to you. Aussie Post OK.

[TourFit]

A $125 flat-pack bench from Mitre 10.

Topped with a chain saw that needs servicing, half a bucket of sand, a collapsible chair, a lunch box containing drill bits, some foam rubber from council cleanup, multiple chip wrappers from the back of the car, a near-empty bottle of sunscreen, a tin of paint thinners, the broken clip from a ...

Trading for what???

[Dotty]

Trade your work-area with my work-area ? ;)

[TourFit]

I cleaned up all the chip/choccy bar wrappers, half empty bottles of sunscreen and beer cans, broken clips, buckets of sand etc BEFORE I took the photos Dotty...

[idgolfguy]

TF's shop is most likely like his kitchen - methodical.

[chappy1970]

TF,
Your shop is not far removed from the Mizzy Tour van.

Less the master Japanese, club fitter that is.

[TourFit]

Oh those transporters are AWESOME...mine is a dingy old shed compared to them.

Have you seen the Nike Van?? Even bigger and better than that. By a long way. Check it out.


http://www.youtube.com/watch?v=79AAcuZjNWU


BTW...those outside 'alcoves' inside the truck, where the windows are, ALL HYDRAULICALLY COME IN TOWARDS THE CENTRAL BENCH FOR TRANSPORTATION !!!

[TourFit]

Not as big or as cool a truck...

...but wait for the Digital Wood Loft/Lie gauge and also the Wood/Hybrid bending machine !!! I WANT THOSE...

Best of all though is the camera based Digital Loft?Lie measuring device...accurate to 0.1*. Fan-bloody-tastic!!!


http://www.youtube.com/watch?v=8SF2vVbgP6Y

[TourFit]

TaylorMade...YOU GOTTA SEE THIS !!!

They don't use the fast set epoxy so common in the Tour Vans (most use the fast curing 3M DP810 Acrylic Adhesive in the syringe pack, that he picks up).

Instead, they use full, normal 24 hour epoxy, but players can hit it within 15 minutes !!!! WTF ??? You get the generally higher bond strength that 24 hour gives + the longer work life (it can sit on a bench made up for 3-4 hours). Ingenious !!!

I likey the gripping station too !!! Foot pump for the solvent - LOL.


http://www.youtube.com/watch?v=-ft1syIejcM

[chappy1970]

TF that TM van video was awesome, it really would be like being a kid in a lolly shop.

[IanO]

That is just beautiful to watch

[TourFit]

TF that TM van video was awesome, it really would be like being a kid in a lolly shop.

How I would love that TM epoxy set up...OH, BABY !!!!

The Ping Van is very inventive...with all the in-house measuring devices and bending tools.

[MegaWatty]

I must say that The Fit's shop is immaculate every time I go there. Absolutely breeds confidence in his work when he keeps it so neat.

9015d head has arrived so I'll be up there to throw the Voodoo out and in to it. :)