PDA

View Full Version : Penley ETA Tour s



zigwah
15th December 2009, 03:27 PM
Anyone had one of these?

Thoughts?

Yossarian
15th December 2009, 03:29 PM
What are they?

EDIT

They are a shaft. Sorry zig haven't tried it.

TourFit
15th December 2009, 03:56 PM
What are they?

EDIT

They are a shaft. Sorry zig haven't tried it.

:smt038 Best confused comment, EVER !!!!



Zig, they were a 67g / 2.5* torque, Boron reinforced tip piece of barge pole :mrgreen:... well, stiff in the tip at least.

I had one for a while, but just found that the light weight (not so good for me), really stiff tip and lowish launch made my bad misses worse. When hit well though it was a pretty nice shaft.

Just not easy. If you are on the cusp of Stiff shafts (some work and some are too stiff) then this will be in the too stiff mould !!! Think ProLaunch Red kinda feel and playability (only stiffer / harder in the tip and slightly lower launch!)

razaar
15th December 2009, 04:14 PM
down one

razaar
15th December 2009, 04:24 PM
I have the Penley TS in the 5-wood (X flex 66 gm, 2.9 torq) and 4-iron (S 75gm,3.3 torq). I used the 5-wood on 17th and approach into 18th when we played Shep. If you can remember both shots that will give you an indication of the trajectory.

Tongueboy
15th December 2009, 04:54 PM
got one in an R7 and it is going. I am old and it is too hard so I am after a good regular shaft to replace it

zigwah
15th December 2009, 08:01 PM
I have the Penley TS in the 5-wood (X flex 66 gm, 2.9 torq) and 4-iron (S 75gm,3.3 torq). I used the 5-wood on 17th and approach into 18th when we played Shep. If you can remember both shots that will give you an indication of the trajectory.

That was a nice shot into 17