Coupla quick feelers....prices firm

[TheNuclearOne]

I'll leave em up for a day or so


Tour Issue Tour Burner TP 9* (This is the rare whole lofted model with lower spin) TXXXX serial, B stamp and from the tour. Shafted with a UST Axivcore Red 79s at 45, same shaft in one less flex Cink used to win the Open. 9/10 no pops skies etc with cover $300 shipped.

Wishon 525GRT 9* head 8/10 $70 shipped

Cobra L4V F 9* head 8-10 no cover $90 SAWLD

TEE CB1 15* stiff stock practically new with cover $115 SAWLD

TEE XCG 15* head only $100 shipped

[Tomson]

If they were both x I would be all over them like a rash.

[TheNuclearOne]

The 79s is tipped 3/4 (1/2 for the BBGM and 1/4 to stiffen) if that helps ;)

[TheNuclearOne]

The 7Z08 is just a teeny bit too much profile with low torque for me. The WB73 was too. The BB73, F7M2 (same profile as 7Z08 but friendlier torque), they suit me great. I'm going to try a 6Z08 down the track, reckon it will be perfect. The other i am after eventually is the Kai"li 70.

The 7Z08 is as anti left and low spin as the WB. Great shaft.

[macjackass]

Stupid cally no hosel crap, i'd love that in my ft-9 :(

[TheNuclearOne]

It's an absolute top shelf kick arse shaft. I've got no qualms at all going for a 6Z down the track.

[TheNuclearOne]

I'll add a CB1 3 wood that's barely been hit and makes 9.5-10. Stock exotics stiff with cover. $130 shipped.

[TheNuclearOne]

L4V head, 9* F 8-10 no cover $100 shipped.

[shawwwww]

What would be the playing length of the fuji in a 909d2? if its 44.5 or more, i may take it.

Thanks

[shawwwww]

Does anyone know? (Sorry if its a dumb question, i had a peak on google, but couldnt find any info)

[TheNuclearOne]

I'm not sure myself, but don't be scared to extend if needed. It's not much drama at all.

[pt73]

Does anyone know? (Sorry if its a dumb question, i had a peak on google, but couldnt find any info)
Do a search on Golfwrx.com someone there should know.

[TheNuclearOne]

7Z08 sold, for one day only i'll do the Burner for $310 total, Exotics for $120 and Wishon for $75.

[TheNuclearOne]

Initial post adjusted.

[TheNuclearOne]

Tour Issue TP Tour Burner head $210 shipped.

[daMANiack]

Stupid cally no hosel crap, i'd love that in my ft-9 :(

Hi,

If you have the right equipment, the FT Callaway series including FT-9 is no drama to remove shaft.

I even was able to re-install a shaft that was previously extracted as the face developed a flaw, the FT-9 was sent back to Callaway and was replaced as a warranty claim.

As I use minimal heat, the original FT-9 ferrule adapter was undamaged and after cleaning up ferrule adapter and FT-9 head, was epoxied into head and Callaway didn't query.

I've done about 15 FT series shaft extractions in the last 6 months with no issues.

Cheerz :) :D ;)

[TheNuclearOne]

shawwwww - how did the 7Z08 go mate?

[xe1]

I'll take the cobra and tee cb1
send me a pm with bank account details

[TheNuclearOne]

L4V and TEE CB1 pending. Sorry Zig i've got to rip it out of your addressed box now 8-)

[zigwah]

lol ok mate :)

[TheNuclearOne]

L4V head and TEE CB1 SAWLD