PDA

View Full Version : Aldila NV love



v205
9th July 2008, 07:42 PM
Who here like / love the Aldila NV at some stage or still playing it now?

If you did use to like it but have moved on, what did you change to?

kwantfm
9th July 2008, 07:43 PM
I like the heavier incarnations of the NV. I have an NV-105 in my 3-wood at the moment. Excellent shaft for a fairway wood.

3oneday
9th July 2008, 08:10 PM
That or a VS proto, both great shafts.

Dazza
9th July 2008, 08:13 PM
I've got the Aldila NV 65 fitted to both my Hybrids. Haven't hit them enough to provide any decent feedback.

gazgolf1
9th July 2008, 08:22 PM
I like it in fairway woods but prefer the higher launch of the VS Proto in my big dog.

leighthebee
9th July 2008, 08:29 PM
can't stand this shaft in my bore through 905t. no feel at all.

Jarro
9th July 2008, 08:43 PM
I had a NV 75 stiff in a 510 TP and loved it ..... great shaft.

I'm actually thinking i wouldn't mind going back to it in a higher lofted driver

Colin
9th July 2008, 08:45 PM
I've tried NV's in a couple of drivers in the past, haven't gotten along with them. Reg flex was like a limp noodle, stiff flex was like swinging a telephone pole. Nothing in the middle really.

I'll accept that proper fitting would probably render my position irrelevant, but I'm getting along so well with the Graphite Design YS 6 in my R5 that I think I'll stick with that for the minute..

Col

v205
9th July 2008, 09:15 PM
I know the VS Proto is higher launching, but is it lower spinning than the NV?
How about the tip stiffness between the 2?

3oneday
9th July 2008, 09:33 PM
NV is stiffer, NV is lower spin as well.

Courty
9th July 2008, 10:40 PM
Never tried an NV, but I had an NVS in my old Callaway FT-hybrid & quite liked the feel in that.

v205
9th July 2008, 11:42 PM
NVS is very different from NV in that it's loose tip, low flex point. (high launch, high spin shaft).

Jono
9th July 2008, 11:51 PM
I've got NV in my driver (NV55 stiff tipped 1.5 inch) and my 3 wood (NV75 tipped standard). Love them. Whenever I try more fancier shafts, I regret it. Always end up going back to the NV. It's seriously smooth ... 8)

TheNuclearOne
10th July 2008, 12:27 AM
I found the NV a seriously decent shaft. What has harmed it is that many of it's incarnations in OEM clubs are either loose spec'd or not the same shaft. e.g. the Tour Edge NV's. The aftermarket NV is good.

v205
10th July 2008, 01:41 AM
Ah yes... the ben hogan NV was a bit dodgy. I think bridgestone's NV is as good as aftermarkets?

lucky
10th July 2008, 08:45 AM
Had an NV stiff in an Adams driver the cpm was in the regular range. Had an NV in a Titty 905T and the cpm measured in the Senior flex, and had a stiff NV in a 585h hybrid which measured in the extra extra stiff range. Not enough quality control for me!

v205
10th July 2008, 10:34 AM
Do they CPM with or without the head?

EDIT: I have noted (and a few others on golfwrx) that the NV 65 S 0.35 played noticably stiffer than the NV 65 S 0.335.

Scottt
10th July 2008, 10:48 AM
I'm surprised Virge hasn't made an appearance in here yet...

I don't think his hatred can be summed up in non-profane words.

v205
10th July 2008, 10:54 AM
While it is known that Aldila NV shaft specs to a big range, why not just CPM it prior to installation? If way out of spec.. request another from supplier?

Do the newer Aldila shafts have the same problem? VS Proto, DVS, SVX etc?

chappy1970
10th July 2008, 03:37 PM
Have had an NV 65s in My Mizuno driver for a few years now and it's hard to fault.

Dropped an NV 75s fairway in my Sonartec, but I've only played one round with it, so a little early to tell.

virge666
11th July 2008, 10:24 AM
I have 6 Aldila NV shafts - and you can all have them for $20 a shaft.

They are like Pubic hair and Brocolli, pull them out or push them aside and continue with your business.

I bloody hate them.

TheNuclearOne
11th July 2008, 05:25 PM
I have 6 Aldila NV shafts - and you can all have them for $20 a shaft.

They are like Pubic hair and Brocolli, pull them out or push them aside and continue with your business.

I bloody hate them.

Got an NV-75 in stiff and .335?

v205
11th July 2008, 06:18 PM
People use to upgrade to aldila NV's... :D

Virge. Tell us what specs your NV's are?

virge666
12th July 2008, 09:51 AM
People use to upgrade to aldila NV's... :D

Virge. Tell us what specs your NV's are?

Will do - they may not be correct though...

;)

But off to golf now !

markTHEblake
12th July 2008, 05:36 PM
I have 6 Aldila NV shafts - and you can all have them for $20 a shaft.

Oh crap, why didnt you tell me that yesterday.

virge666
14th July 2008, 05:47 PM
85 X
65 S x 3
75 S
95 X

TheNuclearOne
14th July 2008, 06:05 PM
85 X
65 S x 3
75 S
95 X

75s X .335?

virge666
14th July 2008, 07:20 PM
Sorry all .350.

TheNuclearOne
14th July 2008, 07:30 PM
Ok, thanks anyway mate.